Wash. Admin. Code § 296-806-46002

Current through Register Vol. 24-23, December 1, 2024

Section 296-806-46002 - Meet height requirements for mill rolls

You must make sure that the tops of mill rolls installed after August 27, 1971, are at least fifty inches above the working level where the operator stands. This distance applies to the actual working level, which could be:

(1) The general floor level.

(2) In a pit.

(3) On a platform.

Wash. Admin. Code § 296-806-46002

Amended by WSR 15-24-102, Filed 12/1/2015, effective 1/5/2016

Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, and 49.17.060. 04-14-028, § 296-806-46002, filed 6/29/04, effective 1/1/05.