Wash. Admin. Code § 296-806-460
Current through Register Vol. 24-23, December 1, 2024
Summary
In addition to the requirements in this section, you need to refer to the following sections of this chapter in order to fully protect your employees from machine hazards:
Requirements for all machines, WAC 296-806-200 and 296-806-300.
This section applies only to mills in the rubber and plastics industry that have in-running metal rolls that are set horizontally and run toward each other.
Your responsibility:
To protect employees from hazards associated with mills.
| You must meet the requirements... | in this section: |
| Meet height requirements for mill rolls | WAC 296-806-46002 |
| Provide mill safety controls | WAC 296-806-46004 |
| Follow these stopping limit requirements for mills | WAC 296-806-46006 |
Wash. Admin. Code § 296-806-460
Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, and 49.17.060. 04-14-028, § 296-806-460, filed 6/29/04, effective 1/1/05.