Wash. Admin. Code § 296-806-42524

Current through Register Vol. 24-23, December 1, 2024

Section 296-806-42524 - Use properly designed covers for screw conveyors (augers)

EXEMPTION:

This requirement does not apply to screw conveyors where there are drop or hinged bottom sections that cannot remain airtight.

You must design covers for screw conveyors that are:

(1) Removable in convenient sections.

(2) Held in place with stationary clamps. Locate stationary clamps at intervals that will keep all covers dust tight.

Wash. Admin. Code § 296-806-42524

Amended by WSR 15-24-102, Filed 12/1/2015, effective 1/5/2016

Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, and 49.17.060. 04-14-028, § 296-806-42524, filed 6/29/04, effective 1/1/05.