N.Y. Comp. Codes R. & Regs. tit. 12 § 800.4
The standards adopted by this Part may be examined at the New York Department of State in Albany, and at the Department of Labor, Division of Safety and Health, in Albany or New York City, or may be purchased from the Superintendent of Documents, United States Government Printing Office, Washington, DC. The standards are also reprinted in the Employment Safety and Health Guide, Volume 2, published by the Commerce Clearing House, Inc., 4025 West Peterson Avenue, Chicago, IL 60646, and in the Occupational Safety and Health Reporter, published by the Bureau of National Affairs, Inc., 1231 25th Street, Washington, DC 20037. The standards incorporated by reference into the Federal standards found in the above-referenced chapters of 29 CFR may be purchased through the following:
Standards of the American Conference of Governmental & Industrial Hygienists (AC-GIH), 6500 Glenway Avenue, Cincinnati, OH 45211;
Standards of the American National Standards Institute (ANSI), 1480 Broadway, New York, NY 10018;
Standards of the American Petroleum Institute (API), 1220 "L" Street NW, Washington, DC 20005;
Standards of the American Welding Society (AWS), P.O. Box 341040, Miami, FL 33135;
Standards of the California Office of Procurement, Publications Section, P.O. Box 1015, North Highlands, CA 95660;
Standards of the Crane Manufacturers Association of America, Inc. (CMAA), 1326 Freeport Road, Pittsburgh, PA 15326;
Standards of the Institute of Makers of Explosives (IME), 1575 Eye NW Street, Suite 550, Washington, DC 20005;
Standards of the National Electrical Manufacturers Association (NEMA), 2101 "L" Street NW, Washington, DC 20037;
Standards of the National Fire Protection Association (NFPA), Batterymarch Park, Quincy, MA 02269;
Standards of the National Institute of Occupational Safety and Health (NIOSH), Superintendent of Documents, Washington, DC 20402;
Standards of the National Technical Information Service (NTIS), Springfield, VA 22161;
Standards of the Power Crane and Shovel Association (PCSA), Construction Industry Manufacturers Association, 111 East Wisconsin Avenue, Milwaukee, WI 53202-4879;
Standards of the Rubber Manufacturers Association (RMA), 1400 "K" Street NW, Washington, DC 20005;
Standards of the Society of Automotive Engineers (SAE), 400 Commonwealth Drive, Warrendale, PA 15096;
Standards of the Underwriters Laboratories (UL), 333 Pfingsten Road, Northbrook, IL 60062;
Standards of the U.S. Department of the Interior (US-DI), Bureau of Reclamation, P.O. Box 25007, Atten: D-922, Denver, CO 80225-0007;
Standards of the U.S. Food and Drug Administration (US-FDA), U.S. Government Printing Office, Superintendent of Documents, Washington, DC 20402.
N.Y. Comp. Codes R. & Regs. Tit. 12 § 800.4