N.M. Admin. Code § 19.15.108.13

Current through Register Vol. 35, No. 23, December 10, 2024

Section 19.15.108.13 - AUTHORITY AND RESPONSIBILITIES OF A REGISTRANT

A. A registered service technician or registered service establishment shall have the authority to:

(1) remove official tested and approved, out-of-order, and not sealed - not legal for trade stickers or tags;

(2) break seals on adjustment mechanisms;

(3) place into commercial service a device that has been officially rejected;

(4) place into commercial service a new or used device.

B. Prior to placing a device into commercial service, it shall be the responsibility of the registered service technician to:

(1) install, service, repair or recondition a commercial device in such a manner that the device will comply with applicable requirements set forth in National Institute of Standards and Technology (NIST) handbook 44, as revised, and the Petroleum Products Standards Act and associated rules;

(2) remove from a commercial device being installed, serviced, repaired, or reconditioned all existing tested and approved, out-of-order or not sealed - not legal for trade stickers or tags;

(3) seal all adjustment mechanisms with an appropriate seal;

(4) affix to a commercial device installed, serviced, repaired, or reconditioned, a clearly visible tag or sticker containing the registered service establishment name or registration number and date on which installation, service, repair or recondition was performed.

N.M. Admin. Code § 19.15.108.13

7/1/97; 19.15.108.13 NMAC - Rn & A, 19 NMAC 15.108.13, 01/31/07, Amended by New Mexico Register, Volume XXIX, Issue 18, September 25, 2018, eff. 11/1/2018