Ill. Admin. Code tit. 77 § 920.15

Current through Register Vol. 48, No. 49, December 6, 2024

Section 920.15 - Incorporated and Referenced Materials

The following rules, standards and statutes are incorporated or referenced in this Part.

a) The following standards are incorporated by reference:

1) National Sanitation Foundation International/American National Standards Institute (NSF/ANSI), Standard NSF/ANSI 14-2010a, Plastic Piping System Components and Related Materials, and Standard NSF/ANSI 61-2012, Drinking Water System Components - Health Effects, published by:

NSF International

789 N. Dixboro Road

P.O. Box 130140

Ann Arbor, Michigan 48113-0140

Referenced in Section 920.90

2) American Society for Testing and Materials (ASTM) International required standards ASTM A53/A53M-10, Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless (2010); ASTM A589/A589M-06, Standard Specification for Seamless and Welded Carbon Steel Water-Well Pipe (2006); ASTM F480-12, Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80 (2006); ASTM D3035-10, Standard Specification for Polyethylene (PE Plastic Pipe (DR-PR)) Based on Controlled Outside Diameter (2010); ASTM C564-11, Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings (2011); and ASTM F477-10, Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe (2010); published by:

American Society for Testing and Materials International

100 Barr Harbor Drive

P.O. Box C700

West Conshohocken, Pennsylvania 19428-2959

Referenced in Sections 920.90 and 920.180

3) Underwriter's Laboratories, Inc., UL 1995 (2005), UL Standard for Safety Heating and Cooling Equipment, published by:

Underwriter's Laboratories, Inc.

333 Pfingster Road

Northbrook, Illinois 60062-2096

Referenced in Section 920.90

4) American Petroleum Institute API SPEC 5L-2011, Specification for Line Pipe, published by:

American Petroleum Institute

1220 L Street, NW

Washington, D.C. 20005-4070

Referenced in Section 920.90

b) The following statutes and rules are referenced:

1) Environmental Protection Act, Title IV, Public Water Supplies [415 ILCS 5 /Title IV]

2) Illinois Water Well and Pump Installation Contractor's License Act [225 ILCS 345 ]

3) Private Sewage Disposal Licensing Act [225 ILCS 225 ]

4) Illinois Groundwater Protection Act [415 ILCS 55 ]

5) Groundwater Quality Standards Code (35 Ill. Adm. Code 620, Subpart B)

6) Practice and Procedure in Administrative Hearings (77 Ill. Adm. Code 100)

7) Drinking Water Systems Code (77 Ill. Adm. Code 900)

8) Illinois Water Well Pump Installation Code (77 Ill. Adm. Code 925)

9) Private Sewage Disposal Code (77 Ill. Adm. Code 905)

10) Direct food substances affirmed as generally recognized as safe (21 CFR 184.1666 Propylene glycol)

c) All incorporations by reference of the standards of nationally recognized organizations refer to the standards on the date specified and do not include any amendments or editions subsequent to the date specified.

d) All materials incorporated by reference are available for inspection and copying at the Department's Central Office, Division of Environmental Health, 525 West Jefferson - Third Floor, Springfield, Illinois 62761.

Ill. Admin. Code tit. 77, § 920.15

Amended at 37 Ill. Reg. 19676, effective November 25, 2013

Amended at 46 Ill. Reg. 15751, effective 8/30/2022