Ariz. Admin. Code § 20-5-508

Current through Register Vol. 30, No. 50, December 13, 2024

Section R20-5-508 - Safety Standard for Manlifts

A. Every owner or operator of a manlift installed, repaired, or altered on or after January 1, 2023, shall comply with ASME A90.1-2015 (Safety Standard for Belt Manlifts), which is incorporated by reference. For purposes of a repair or alteration, compliance with the specified standard shall apply, to the extent possible, to the scope of the repair or alteration. This incorporation by reference does not include any later amendments or editions of the incorporated matter.

B. Every owner or operator of a manlift installed, repaired, or altered prior to January 1, 2023, shall comply with either:

(1) ASME A90.1-2015 (Safety Standard for Belt Manlifts); or

(2) ASME A90.1-2003 (Safety Standard for Belt Manlifts), which are incorporated by reference. For purposes of a repair or alteration, compliance with the specified standard shall apply, to the extent possible, to the scope of the repair or alteration. These incorporations by reference do not include any later amendments or editions of the incorporated matter.

C. A copy of The referenced material is available for review at the Industrial Commission of Arizona, 800 West Washington Street, Phoenix, Arizona 85007, and ASME at Three Park Avenue, New York, New York 10016-5990 or at http://www.asme.org.

Ariz. Admin. Code § R20-5-508

Adopted effective November 9, 1979 (Supp. 79-6). R20-5-508recodified from R4-13-508 (Supp. 95-1). Amended by final rulemaking at 9 A.A.R. 381, effective March 15, 2003 (Supp. 03-1). Amended by final rulemaking at 15 A.A.R. 872, effective May 5, 2009 (Supp. 09-2). Amended by final rulemaking at 29 A.A.R. 512, effective 1/9/2023.