Current through the 2024 legislative session
Section 21-13-701 - Submission of question to electors authorized; purposes for which indebtedness may be created; required public hearing on bonding proposition; reserve fund for maintenance required(a) The board of trustees of a school district may, after conducting at least two (2) public hearings as required under subsection (c) of this section and subject to subsection (d) of this section, submit to the qualified electors of the district on a date authorized under W.S. 22-21-103, the question of creating an indebtedness for the purpose of: (i) Acquiring or improving land;(ii) Acquiring or erecting buildings;(iii) Enlarging, improving, remodeling, repairing or adding to buildings;(iv) Equipping and furnishing buildings;(v) Repair and maintenance; and(vi) Any combination of the above.(b) The purposes for which an indebtedness may be created shall be broadly construed. It is the intention of the legislature that school districts be empowered to create indebtedness under this section for any purpose which, directly or indirectly, enables the district to provide facilities which are in excess of the statewide standards for the adequacy of school buildings and facilities.(c) Prior to submitting a bonding proposition to district voters in accordance with subsection (a) of this section, the school district board of trustees shall hold at least two (2) public hearings within the district at which the board provides an explanation of the need to obtain district funding for building and facility features that are in excess of state standards for buildings and facilities.(d) In addition to subsection (a) of this section and for any bond proposition submitted to district voters on or after July 1, 2007, the proposition shall provide that not less than three percent (3%) of bond proceeds be used for the creation of reserves or sinking funds for the maintenance and repair of any buildings or facilities or any building or facility features in excess of state building and facility adequacy standards which are to be constructed or otherwise acquired through the bond issue.