Section 64.90.245 - Maps-Exception-Amendments-Requirements-Recording(1) A map is required for all common interest communities. For purposes of this chapter, a map must be construed as part of the declaration.(2) With the exception of subsections (1), (3), (4), and (14) of this section, this section does not apply to a plat as defined in RCW 58.17.020.(3) The map for a common interest community must be executed by the declarant and recorded concurrently with, and contain cross-references by recording number to, the declaration.(4) An amendment to a map for a common interest community must be executed by the same party or parties authorized or required to execute an amendment to the declaration, contain cross-references by recording number to the declaration and any amendments to the declaration, and be recorded concurrently with an amendment to the declaration. With respect to a plat community, (a) any amendment to the map must be prepared and recorded in compliance with the requirements, processes, and procedures in chapter 58.17 RCW and of the local subdivision ordinances of the city, town, or county in which the plat community is located, and (b) any amendment to the declaration must conform to the map as so approved and recorded.(5) A map for a cooperative may be prepared by a licensed land surveyor, and may be incorporated into the declaration to satisfy subsection (3) of this section and RCW 64.90.225(1)(d). If the map for a cooperative is not prepared by a licensed land surveyor, the map need not contain the certification required in subsection (6)(a) of this section.(6) The map for a common interest community must be clear and legible and must contain: (a) If the map is a survey, a certification by a licensed land surveyor in substantially the following form: SURVEYOR CERTIFICATE: This map correctly represents a survey made by me or under my direction in conformance with the requirements of the Survey Recording Act at the request of ..... (name of party requesting the survey) on ..... (date). I hereby certify that this map for ..... (name of common interest community) is based upon an actual survey of the property herein described; that the bearings and distances are correctly shown; that all information required by the Washington Uniform Common Interest Ownership Act is supplied herein; and that all horizontal and vertical boundaries of the units, (1) to the extent determined by the walls, floors, or ceilings thereof, or other physical monuments, are substantially completed in accordance with said map, or (2) to the extent such boundaries are not defined by physical monuments, such boundaries are shown on the map. (Surveyor's name, signature, license or certificate number, and acknowledgment)
(b) If the map is not a survey, a certification in substantially the following form: DECLARANT CERTIFICATE: I hereby certify on behalf of ..... (declarant) that this map for ..... (name of common interest community) was made by me or under my direction in conformance with the requirements of RCW 64.90.245; that all information required by the Washington Uniform Common Interest Ownership Act is supplied herein; and that all horizontal and vertical boundaries of the units, (1) to the extent determined by the walls, floors, or ceilings thereof, or other physical monuments, are substantially completed in accordance with said map, or (2) to the extent such boundaries are not defined by physical monuments, such boundaries are shown on the map. (Declarant's name, signature, and acknowledgment)
(c) A declaration by the declarant in substantially the following form: DECLARANT DECLARATION: The undersigned owner or owners of the interest in the real estate described herein hereby declare this map and dedicate the same for a common interest community named ..... (name of common interest community), a ..... (type of community), as that term is defined in the Washington Uniform Common Interest Ownership Act, solely to meet the requirements of the Washington Uniform Common Interest Ownership Act and not for any public purpose. This map and any portion thereof is restricted by law and the Declaration for ..... (name of common interest community), recorded under (name of county in which the common interest community is located) County Recording No. ..... (recording number). (Declarant's name, signature, and acknowledgment)
(7) Each map filed for a common interest community, and any amendments to the map, must be in the style, size, form, and quality as prescribed by the recording authority of the county where filed, and a copy must be delivered to the county assessor.(8) Each map prepared for a common interest community in compliance with this chapter, and any amendments to the map, must show or state:(a) The name of the common interest community and, immediately following the name of the community, a statement that the common interest community is a condominium, cooperative, or miscellaneous community as defined in this chapter. A local jurisdiction may also require that the name of a plat community on the survey, plat, or map be followed by a statement that the common interest community is a plat community as defined in this chapter;(b) A legal description of the land in the common interest community;(c) As to a condominium, a survey of the land in the condominium, and as to a cooperative, a survey or a drawing of the land included in the entire cooperative that complies with the other requirements of this section;(d) If the boundaries of land subject to the development right to withdraw are fixed in the declaration or an amendment to the declaration pursuant to RCW 64.90.225(1)(h)(i), and subject to the provisions of the declaration, an amendment to the map if not contained in the initial recorded map, the legal description and boundaries of that land, labeled "MAY BE WITHDRAWN FROM THE [COMMON INTEREST COMMUNITY];(e) If the boundaries of land subject to the development right to add units that will result in the reallocation of allocated interests is fixed in the declaration or an amendment to the declaration pursuant to RCW 64.90.225(1)(h)(i), and subject to the provisions of the declaration, the legal description and boundaries of that land, labeled "SUBJECT TO DEVELOPMENT RIGHTS TO ADD UNITS THAT WILL RESULT IN A REALLOCATION OF ALLOCATED INTERESTS";(f) The location and dimensions of all existing buildings containing or comprising units;(g) The extent of any encroachments by or upon any portion of the common interest community;(h) To the extent feasible, the location and dimensions of all recorded easements serving or burdening any portion of the common interest community and any unrecorded easements of which a surveyor or declarant knows or reasonably should have known;(i) The location and dimensions of vertical unit boundaries;(j) The location with reference to an established datum of horizontal unit boundaries, and that unit's identifying number. With respect to a cooperative, miscellaneous community, or condominium for which the horizontal boundaries are not defined by physical monuments, reference to an established datum is not required if the location of the horizontal boundaries of a unit is otherwise reasonably described or depicted;(k) The legal description and the location and dimensions of any real estate in which the unit owners will own only an estate for years, labeled as "LEASEHOLD REAL ESTATE";(l) The distance between any noncontiguous parcels of real estate comprising the common interest community;(m) The general location of any existing principal common amenities listed in a public offering statement under RCW 64.90.610(1)(k);(n) The general location of porches, decks, balconies, patios, storage facilities, moorage spaces, or parking spaces that are allocated as limited common elements, and any applicable identifying number or designation; and(o) As to any survey, all other matters customarily shown on land surveys.(9) The map for a common interest community may also show the anticipated approximate location and dimensions of any contemplated improvement to be constructed anywhere within the common interest community, and any contemplated improvement shown must be labeled either "MUST BE BUILT" or "NEED NOT BE BUILT."(10) The map for a common interest community must identify any unit in which the declarant has reserved the right to create additional units or common elements under RCW 64.90.250(3).(11) Unless the declaration provides otherwise, any horizontal boundary of part of a unit located outside a building has the same elevation as the horizontal boundary of the inside part and need not be depicted on the map.(12) Upon exercising any development right, the declarant must record either new maps necessary to conform to the requirements of subsections (3), (4), (6), and (8) of this section, or new certifications of any map previously recorded if that map otherwise conforms to the requirements of subsections (3), (4), (6), and (8) of this section.(13) Any survey and the surveyor certifications required under this section must be made by a licensed surveyor.(14) As to a plat community, the information required under subsections (6)(a) and (c), (8)(d) through (g), (k), (m), and (n), (9), and (10) of this section is required, but may be shown on a map incorporated in or attached to the declaration, and need not be shown on the plat community map. Any such map is deemed a map for purposes of applying the provisions of this section, and the declarant must provide the certification required under subsection (6)(b) of this section.(15) In showing or projecting the location and dimensions of the vertical boundaries of a unit located in a building, it is not necessary to show the thickness of the walls constituting the vertical boundaries or otherwise show the distance of those vertical boundaries either from the exterior surface of the building containing that unit or from adjacent vertical boundaries of other units if: (a) The walls are designated to be the vertical boundaries of that unit;(b) the unit is located within a building, the location and dimensions of the building having been shown on the map under subsection (8)(f) of this section; and(c) the graphic general location of the vertical boundaries are shown in relation to the exterior surfaces of that building and to the vertical boundaries of other units within that building.Amended by 2019 c 238,§ 207, eff. 7/28/2019.Added by 2018 c 277,§ 210, eff. 7/1/2018.