Section 4110 - Specific powers and duties of department; regulations(a) Regulations.--The department shall issue from time to time regulations for the enforcement and administration of this subchapter, which regulations, upon being promulgated pursuant to law, shall have the force and effect of law. These regulations may include:(1) Standards of net weight, measure, count and standards of fill for any commodity in package form.(2) Rules governing the technical and reporting procedures to be followed and the report and record forms and marks of approval and rejection to be used by inspectors of weights and measures in the discharge of their official duties.(3) Exemptions from the sealing or marking requirements of section 4119 (relating to disposition of correct and incorrect apparatus) with respect to weights and measures of such character or size that such sealing or marking would be inappropriate, impracticable or damaging to the apparatus in question.(4) Institution of a program containing standards whereby individuals shall be department-certified as Certified Examiners of Weights and Measures. Certification under such program may be for a given category or categories of measuring or weighing devices or for a particular type of device except for commercially used truck-mounted fuel oil meters and retail motor fuel dispensers. The department shall certify only such individuals who : (i) successfully complete the appropriate training course or courses prescribed by the National Institute of Standards and Technology for the type of certification sought and who comply with departmental certification standards promulgated under this paragraph ; and(ii) are not the owner or lessee of the devices tested and inspected, or an employee or agent of the owner or lessee of the devices tested and inspected . Any program instituted under this paragraph shall include testing and inspection performance standards, reporting procedures, random inspection and testing by inspectors of a sample of devices inspected and tested by Certified Examiners of Weights and Measures and any other type of standards or procedures the department deems necessary to implement the program.
(b) Specifics.--These regulations shall include specifications, tolerances and regulations for weights and measures of the character of those specified in section 4112 (relating to general testing and inspections) designed to eliminate from use, without prejudice to apparatus that conforms as closely as practicable to the official standards, those: (1) that are not accurate;(2) that are of such construction that they are faulty, that is, that are not reasonably permanent in their adjustment or will not repeat their indications correctly; or(3) that facilitate the perpetration of fraud. The specifications, tolerances and regulations for commercial weighing and measuring devices, together with amendments thereto as recommended by the National Institute of Standards and Technology and published in National Institute of Standards and Technology Handbook 44, and supplements thereto, or in any publication revising or superseding Handbook 44, shall be the specifications, tolerances and regulations for commercial weighing and measuring devices of the Commonwealth except insofar as specifically modified, amended or rejected by a regulation issued by the department. For the purposes of this subchapter, apparatus shall be deemed to be correct when it conforms to all applicable requirements promulgated as specified in this section; other apparatus shall be deemed to be incorrect.
(c) Method.--Regulations shall be promulgated in the manner prescribed by law.(d) Reports.--On or before March 1 of each year after the effective date of this subsection, the department shall submit a report to the Agriculture and Rural Affairs Committee of the Senate and the Agriculture and Rural Affairs Committee of the House of Representatives which shall describe all relevant activities of inspectors , Certified Examiners of Weights and Measures and city and county sealers of weights and measures for the preceding calendar year. The report shall contain, at a minimum, the following:
(1) An identification of the regions of this Commonwealth served by inspectors and city and county sealers of weights and measures and the number of such inspectors and city and county sealers of weights and measures in each region.(2) The number of inspections made by each inspector, Certified Examiners of Weights and Measures and city and county sealers of weights and measures.(3) The number and nature of enforcement actions initiated by each inspector and city and county sealers of weights and measures.(4) The disposition of each enforcement action, including the number and nature of warnings issued by each inspector and city and county sealers of weights and measures.Amended by P.L. 1332 2012 No. 169, § 1.1, eff. 10/24/2012.1996, Dec. 18, P.L. 1028, No. 155, § 1, effective in 60 days.