Section 39-10-35 - Required position and method of turningThe driver of a vehicle intending to turn shall do so as follows:
1. Right turns. Both the approach for a right turn and a right turn must be made as close as practicable to the right-hand curb or edge of the roadway.2. Left turns. The driver of a vehicle intending to turn left shall approach the turn in the extreme left-hand lane lawfully available to traffic moving in the direction of travel of such vehicle. Whenever practicable, the left turn must be made to the left of the center of the intersection and so as to leave the intersection or other location in the extreme left-hand lane lawfully available to traffic moving in the same direction as such vehicle on the roadway being entered.3. The director and local authorities in their respective jurisdictions may cause official traffic-control devices to be placed and thereby require and direct that a different course from that specified in this section be traveled by turning vehicles, and when such devices are so placed, no driver of a vehicle may turn it other than as directed and required by such devices.