Section 23-486 - Boiler advisory board; members; terms; meetingsA. The boiler advisory board is established to assist the commission in drafting standards and regulations for boilers, pressure vessels and lined hot water heaters. The boiler advisory board consists of the following members who are appointed by the commission:1. One member who represents the boiler, pressure vessel or lined hot water heater manufacturer industry.2. One member who represents a public utility.3. One member who represents the insurance industry.4. One member who is an owner or operator of a boiler, pressure vessel or lined hot water heater.5. One member who is a licensed contractor.B. The initial members of the boiler advisory board shall assign themselves by lot to terms of one or two years in office. All subsequent members serve three-year terms of office. The chairperson shall notify the commission of these appointments.C. The boiler advisory board shall annually elect a chairperson from its members.D. The boiler advisory board shall meet at least annually and on the call of the commission. The commission shall determine the time and place of boiler advisory board meetings.Amended by L. 2017, ch. 147,s. 17, eff. 8/9/2017.Added by L. 2016, ch. 356,s. 12, eff. 8/5/2016.