Section Trans 258.04 - Permit application(1) An application for a permit shall be submitted on a department form and shall include the following: (a) The name, address and telephone number of the applicant.(b) The name, address and telephone number of the applicant's insurer and the applicant's policy number and policy expiration date.(c) The date on which the applicant seeks to have the permit first become valid, not more than 60 days later than the date of application.(d) The overall weight and height of the vehicle, trailer length, and the gross weight of the vehicle.(e) An indication of whether the vehicle is a combination vehicle and the type of combination, a description of the vehicle power unit and the complete vehicle identification number for the power unit.(f) The make, year and vehicle identification number for any trailer.(g) An indication of the number of pneumatic tires and maximum gross weight for each axle on the vehicle.(h) An indication of the spacing between each axle.(i) An indication as to whether any axle is steerable.(j) An affirmation that the owner has insurance in the amounts required by this chapter or such higher amount as may be required by the department and that the person accepts the terms of the issuance of a permit under this chapter.(k) For each access route permitted under s. Trans 258.06(4) (b) for which the applicant seeks authority to operate, written proof that permission for operation on access routes has been granted by any local authority or person in charge of maintaining those highways.(2) A permit application may be submitted in person or by mail to the motor carrier services section permit unit.Wis. Admin. Code Department of Transportation Trans 258.04
Cr. Register, August, 1996, No. 488, eff. 9-1-96.Permit application procedures are specified in s. Trans 250.025. The Motor Carrier Services Section Permit Unit of the Wisconsin Department of Transportation is located at 4802 Sheboygan Avenue, Room 151, P.O.,Box 7980, Madison, WI 53707. Permit applications may be obtained from that unit.