Wis. Admin. Code Department of Safety and Professional Services SPS 381.20

Current through November 25, 2024

Section SPS 381.20 - Incorporation of standards by reference

(1) CONSENT.

(a) Pursuant to s. 227.21 (2), Stats., the attorney general has consented to the incorporation by reference of the standards listed in sub. (3).

(b) The codes and standards that are referenced in this chapter, and any additional codes and standards that are subsequently referenced in those codes and standards, shall apply to the prescribed extent of each such reference, except as modified by this chapter.

Note: Copies of the adopted standards are on file in the offices of the department and the legislative reference bureau. Copies of the standards may be purchased through the respective organizations listed in Tables 381.20-1 to 381.20-13.

(2) ALTERNATE STANDARDS.

(a) Alternate standards that are equivalent to or more stringent than the standards referenced in chs. SPS 381 to 387 may be used in lieu of the referenced standards when approved by the department or if written approval is issued by the department in accordance with par. (b).

1. Upon receipt of a fee and a written request, the department may issue an approval for the use of the alternate standard.

2. The department shall review and make a determination on an application for approval within 40 business days of receipt of all forms, fees and documents required to complete the review.

Note: Review fees for standards under this paragraph are listed in ch. SPS 302.

(b) Determination of approval shall be based on an analysis of the alternate standard and the standard referenced in chs. SPS 381 to 387, prepared by a qualified independent third party or the organization that published the standard contained in chs. SPS 381 to 387.

(c) The department may include specific conditions in issuing an approval, including an expiration date for the approval. Violations of the conditions under which an approval is issued shall constitute a violation of chs. SPS 381 to 387.

(d) If the department determines that the alternate standard is not equivalent to or more stringent than the referenced standard, the request for approval shall be denied in writing.

(e) The department may revoke an approval for any false statements or misrepresentations of facts on which the approval was based.

(f) The department may reexamine an approved alternate standard and issue a revised approval at any time.

(3) ADOPTION OF STANDARDS. The standards referenced in Tables 381.20-1 to 381.20-13 are incorporated by reference into chs. SPS 381 to 387.

Note: The tables in this section provide a comprehensive listing of all of the standards adopted by reference in chs. SPS 381 to 387. For requirements or limitations in how these standards are to be applied, refer to the code section that requires compliance with the standard.

(4) DEPARTMENT AUTHORITY. A department interpretation of an adopted standard under this chapter shall supersede any differing interpretation by either a lower level jurisdiction or an issuer of the adopted standard.

Table 381.20-1
AHAM	Association of Home Appliance Manufacturers 1111 19th Street, NW Suite 402 Washington, DC 20036 Phone: 202-872-5955 Web page: www.aham.org
Standard Reference Number	Title
DW-2-2020	Household Electric Dishwashers

Table 381.20-3e
ASME	American Society of Mechanical Engineers Two Park Avenue New York, New York 10016-5990 Phone: 800-843-2763 Website: www.asme.org
Standard Reference Number	Title
1. A112.1.2-2012 (R2017)	Air Gaps in Plumbing Systems (For Plumbing Fixtures and Water-Connected Receptors)
2. A112.1.3-2000 (R2015)	Air-gap Fittings for Use with Plumbing Fixtures, Appliances, and Appurtenances
3. A112.3.1-2007 (R2017)	Stainless Steel Drainage Systems for Sanitary DWV, Storm and Vacuum Applications Above and Below Ground
4. A112.3.4-2018/CSA B45.9-18	Macerating Toilet Systems and Waste Pumping Systems for Plumbing Fixtures
5. A112.4.1-2009 (R2019)	Water Heater Relief Valve Drain Tubes
6. A112.4.2-2015/CSA B45.16-15 (R2020)	Personal Hygiene Devices for Water Closets
7. A112.6.1M-97 (R2017)	Supports for Off-the-Floor Plumbing Fixtures for Public Use
8. A112.6.2-2017	Framing-Affixed Supports (Carriers) for Off-the-Floor Plumbing Fixtures
9. A112.6.3-2019	Floor and Trench Drains
10. A112.6.4-2003 (R2012)	Roof, Deck and Balcony Drains
11. A112.6.9-2005 (R2015)	Siphonic Roof Drains
12. A112.14.1-2003 (R2017)	Backwater Valves
13. A112.14.3-2018	Hydromechanical Grease Interceptors
14. A112.14.4-2001 (R2012)	Grease Removal Devices
15. A112.14.6-2010	FOG (Fats, Oils and Greases) Disposal Systems
16. A112.18.1-2018 / CSA B125.1-18	Plumbing Supply Fittings
17. A112.18.3-2002 (R2017)	Performance Requirements for Backflow Protection Devices and Systems in Plumbing Fixture Fittings
18. A112.18.6-2017 / CSA B125.6-17	Flexible Water Connectors
19. A112.19.1-2018 / CSA B45.2-18	Enameled Cast Iron and Enameled Steel Plumbing Fixtures
20. A112.19.2-2018 / CSA B45.1-18	Vitreous China Plumbing Fixtures and Hydraulic Requirements for Water Closets and Urinals
21. A112.19.3-2017 / CSA B45.4-17	Stainless Steel Plumbing Fixtures (Designed for Residential Use)
22. A112.19.4M-1994 (R2009)	Porcelain Enameled Formed Steel Plumbing Fixtures
23. A112.19.5-2017 / CSA B45.15-17	Flush Valves and Spuds for Water-Closets, Urinals, and Tanks
24. B1.20.1-2013 (R2018)	Pipe Threads, General Purpose, (Inch)
25. B16.1-2020	Gray Iron Pipe Flanges and Flanged Fittings (Classes 25, 125, and 250)
26. B16.3-2016	Malleable Iron Threaded Fittings (Classes 150 and 300)
27. B16.4-2016	Gray Iron Threaded Fitting (Classes 125 and 250)
28. B16.5-2020	Pipe Flanges and Flanged Fittings: NPS 1/2 through NPS 24 Metric/Inch Standard
29. B16.9-2018	Factory-Made Wrought Buttwelding Fittings
30. B16.11-2016	Forged Fittings, Socket-Welding and Threaded
31. B16.12-2019	Cast Iron Threaded Drainage Fittings
32. B16.15-2018	Cast Bronze Threaded Fittings (Classes 125 and 250)
33. B16.18-2018	Cast Copper Alloy Solder Joint Pressure Fittings
34. B16.22-2018	Wrought Copper and Copper Alloy Solder-Joint Pressure Fittings
35. B16.23-2016	Cast Copper Alloy Solder Joint Drainage Fittings: DWV
36. B16.24-2016	Cast Copper Alloy Pipe Flanges, Flanged Fittings, and Valves: Classes 150, 300, 600, 900, 1500, and 2500
37. B16.26-2018	Cast Copper Alloy Fittings for Flared Copper Tubes
38. B16.29-2017	Wrought Copper and Wrought Copper Alloy Solder Joint Drainage Fittings - DWV
39. B16.42-2016	Ductile Iron Pipe Flanges and Flanged Fittings, (Classes 150 and 300)
40. B16.45-1998 (R2006)	Cast Iron Fittings for Sovent® Drainage Systems
41. B36.19M-2018	Stainless Steel Pipe

Table 381.20-3p
ASPE	American Society of Plumbing Engineers (ASPE) 6400 Shafer Ct, Ste 350, Rosemont, Illinois 60018-4914 Phone: (847) 296-0002 Website: www.aspe.org
Standard Reference Number	Title
1. 45-2018	Siphonic Roof Drainage

Table 381.20-4
ASSE/IAMPO	American Society of Sanitary Engineering 18927 Hickory Creek Drive, Suite 220 Mokena, Illinois 60448 Phone: 708-995-3019 Website: www.asse-plumbing.org
Standard Reference Number	Title
1. 1001-2021	Atmospheric Type Vacuum Breakers
2. ASSE 1002-2020/ASME A112.1002-2020/CSA B125.12.20	Anti-siphon Fill Valves for Water Closet Tanks
3. 1003-2020 e1	Water Pressure Reducing Valves for Potable Water Distribution Systems
4. 1004-2017	Commercial Dishwashing Machines
5 1006-1989	Residential Use (Household) Dishwashers
6 1007-1992	Home Laundry Equipment
7. 1008-2020	Plumbing Aspects of Residential Food Waste Disposer Units
8 1009-1990	Commercial Food Waste Grinder Units
9. 1010-2004	Water Hammer Arresters
10. 1011-2017	Hose Connection Vacuum Breakers
11. 1012-2021	Backflow Preventer with Intermediate Atmospheric Vent
12. 1013-2021	Reduced Pressure Principle Backflow Preventers and Reduced Pressure Principle Fire Protection Backflow Preventers
13. 1014-2020	Backflow Prevention Devices for Hand-Held Showers
14. 1015-2021	Double Check Backflow Prevention Assemblies and Double Check Fire Protection Backflow Prevention Assemblies
15. ASSE 1016-2017/ASME A112.1016-2017/CSA B125.16-17	Automatic Compensating Valves for Individual Showers and Tub/Shower Combinations
16. 1017-2009	Temperature Actuated Mixing Valves for Hot Water Distribution Systems
17. 1018-2001 (R2021)	Trap Seal Primer Valves - Potable Water Supplied
18. 1019-2011 (R2016)	Wall Hydrant with Backflow Protection and Freeze Resistance
19. 1020-2020 e1	Pressure Vacuum Breaker Assembly
20. 1022-2021	Backflow Preventer for Beverage Dispensing Equipment
21. 1023-2020	Hot Water Dispensers, Household Storage Type, Electrical
22. 1024-2017 (R2021)	Dual Check Backflow Preventers
23. 1032-2004 (R2021)	Dual Check Valve Type Backflow Preventers for Carbonated Beverage Dispensers, Post-Mix Type
24. 1035-2020	Laboratory Faucet Backflow Preventers
25. 1037-2015/ASME A112.1037-2015/CSA B125.37-15 (R2020)	Pressurized Flushing Devices for Plumbing Fixtures
26. 1044-2015	Trap Seal Primer - Drainage Types and Electric Design Types
27. 1047-2021	Reduced Pressure Detector Fire Protection Backflow Prevention Assemblies, Performance Requirements for
28. 1048-2021	Double Check Detector Fire Protection Backflow Prevention Assemblies, Performance Requirements for
29. 1050-2021	Stack Air Admittance Valves for Sanitary Drainage Systems
30. 1051-2021	Individual and Branch Type Air Admittance Valves for Sanitary Drainage Systems
31. 1052-2016	Hose Connection Backflow Preventers, Performance Requirements for
32. 1053-2019	Dual Check Backflow Preventer Wall Hydrants - Freeze Resistant Type, Performance Requirements for
33. ANSI/CAN/ASSE/ IAPMO 1055-2020	Chemical Dispensing Systems with Integral Backflow Protection, Performance Requirements for
34. 1056-2013 (R2021)	Spill Resistant Vacuum Breaker Assemblies, Performance Requirements for
35. 1057-2012	Freeze Resistant Sanitary Yard Hydrants with Backflow Protection, Performance Requirements for
36. 1061-2020	Performance Requirements for Push-Fit Fittings
37. 1066-1997	Individual Pressure Balancing In-Line Valves for Individual Fixture Fittings
38. 1072-2020	Performance Requirements for Barrier Type Trap Seal Protection for Floor Drains
39. 1079-2012 (R2021)	Performance Requirements for Dielectric Pipe Unions
40. 1081-2014 (R2020)	Performance Requirements for Backflow Preventers with Integral Pressure Reducing Boiler Feed Valve and Intermediate Atmospheric Vent Style for Domestic and Light Commercial Water Distribution Systems
ASSE/IAPMO/ANSI 41. SERIES 5000-2022e1	Cross Connection Control Professional Qualifications
IAPMO/ANSI 42. Z1001-2016	(Prefabricated Gravity Grease Interceptors)

Wis. Admin. Code Department of Safety and Professional Services SPS 381.20

Cr. Register, April, 2000, No. 532, eff. 7-1-00; r. (2), renum. (3) to be (2) and am., r. and recr. Table 81.20-2, cr. Tables 81.20 -3e, 81.20-7e and 81.20-10m, am. Tables 81.20 -4 to 81.20-8 and 81.20-11, r. Table 81.20-14, Register, December, 2000, No. 540, eff. 1-1-01; correction in (1) made under s. 13.93(2m) (b) 7, Stats., Register, December, 2000, No. 540; CR 02-002: r. and recr. Register April 2003 No. 568, eff. 5-1-03; CR 02-129: am Table 81.20-8 Register January 2004 No. 577, eff. 2-1-04; CR 04-035: am. Table 81.20-4 and 81.20-10m Register November 2004 No. 587, eff. 12-1-04; CR 07-100: cr. (4) Register September 2008 No. 633, eff. 10-1-08; CR 08-055: am. (1), Tables 81.20 -1 to 81.20-9 and Tables 81.20 -11 to 81.20-13, r. Table 81.20-10, renum. Table 81.20-10m to be Table 81.20-10 and am. Register February 2009 No. 638, eff. 3-1-09; CR 10-064: am. Tables 81.20 -2, 81.20-3e, 81.20-4, 81.20-7 Register December 2010 No. 660, eff 1-1-11; correction in (3) made under s. 13.92(4) (b) 7, Stats., Register December 2011 No. 672; CR 13-062: am. Table 381.20-11 Register February 2014 No. 698, eff. 3-1-14.

Amended by, CR 17-065: am. (2) (a) (intro.), (b), (c), (3), Table 81.20-11 Register June 2018 No. 750, eff. 7-1-18; correction in numering in Table 381.20-11 under s. 13.92 (4) (b) 1, Stats., Register June 2018 No. 750, eff. 7/1/2018

Amended by, correction in numering in Table 381.20-11 under s. 13.92 (4) (b) 1, Stats., Register June 2018 No. 750; CR 23-006: am. (3), Table 381.20-1, r. Table 381.20-2, Table 381.20-3, r. and recr. Table 381.20-3e, cr. Table 381.20-3p, r. and recr. Table 381.20-4 to Table 381.20-11, cr. Table 381.20-11m, am. Table 381.20-12, r. and recr. Table 381.20-13 Register September 2023 No. 813, eff. 10/1/2023