Section 296-874-40022 - Meet these requirements when using form scaffolds and carpenter's bracket scaffolds(1) You must secure folding-type metal brackets that have been extended for use, with: (2) You must make sure wooden-bracket form scaffolds are an integral part of the form panel.(3) You must attach each bracket, other than those for wooden bracket-form scaffolds, to the supporting form-work or structure by using one or more of the following: (b) A metal stud attachment device;(d) Hooking over a secured structural supporting member, with the form wales either: (i) Bolted to the form; or(ii) Secured by snap ties or tie bolts extending through the form and securely anchored.(e) For carpenters' bracket scaffolds only, using a bolt extending through to the opposite side of the structure's wall.Wash. Admin. Code § 296-874-40022
Amended by WSR 15-23-086, Filed 11/17/2015, effective 12/18/2015Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, 49.17.060. 05-01-054, § 296-874-40022, filed 12/7/04, effective 3/1/05.