Section 296-874-20016 - Stabilize the ends of platforms(1) You must make sure each end of a platform:(a) Is cleated or restrained by hooks or equivalent means; or(b) Extends over the centerline of its support at least six inches (15 cm). (2) You must make sure the cantilevered portion of a platform meets at least one of the following: (a) Is designed and installed to support employees or material without tipping;(b) Has guardrails which block employee access to the cantilevered end;(c) Extends over its support not more than:(i) Twelve inches (30 cm) if the platform length is ten feet or less; or(ii) Eighteen inches (46 cm) if the platform length is greater than ten feet. Note: | The cantilevered portion of a platform is the portion that is not supported on one end. |
Wash. Admin. Code § 296-874-20016
Amended by WSR 15-23-086, Filed 11/17/2015, effective 12/18/2015Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, 49.17.060. 05-01-054, § 296-874-20016, filed 12/7/04, effective 3/1/05.