Wash. Admin. Code § 296-870-60010

Current through Register Vol. 24-23, December 1, 2024

Section 296-870-60010 - Stabilization systems

(1) You must make sure the exterior of each building is provided with at least one of the following stabilization systems:

(a) Continuous tie-in guides;

(b) Intermittent stabilization system;

(c) Button guide stabilization system;

(d) System using angulated roping and building face rollers;

(e) System equivalent to a continuous tie-in guide system.

EXEMPTION:	* Tie-in guides may be eliminated for not more than seventy-five feet (22.9 m) of the uppermost elevation of the building if:
	1. Using tie-in guides there is not feasible due to building design;
	AND
	2. Angulated roping is used that provides a stabilizing force of at least ten pounds (44.4 n) under all conditions of loading.

(2) You must make sure embedded tie-down anchors, fasteners, and affected structures are corrosion-resistant.

Wash. Admin. Code § 296-870-60010

Amended by WSR 15-23-086, Filed 11/17/2015, effective 12/18/2015

Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, 47.17.060. 06-19-075, § 296-870-60010, filed 9/19/06, effective 1/1/07.