Table 3
Approved Elevating Work Platform Use in Class 1 Locations
Class 1 Locations in which flammable gases or vapors are, or may be, present in the air in quantities sufficient to produce explosive or ignitable mixtures | |||||||
Division 1 Conditions exist continuously, intermittently, or periodically under normal operating conditions. | Division 2 Conditions may occur accidentally, for example, due to a puncture of a storage drum. | ||||||
Group A Acetylene | Group B Hydrogen | Group C Ethyl ether | Group D Acetone Alcohols Benzene | Group A Acetylene | Group B Hydrogen | Group C Ethyl ether | Group D Acetone Alcohols Benzene |
Gasoline Lacquer Solvent | Gasoline Lacquer Solvent | ||||||
No type can be used | No type can be used | No type can be used | Use this elevating work platform type: EX | No type can be used | No type can be used | No type can be used | Use this elevating work platform type: DS DY ES EE EX GS LPS |
Table 4
Approved Elevating Work Platform Use in Class 2 Locations
Class 2 Locations which are hazardous because of the presence of combustible dust | |||||
Division 1 Explosive mixture may be present under normal operating conditions, or where failure of equipment may cause the condition to exist simultaneously with arcing or sparking of electrical equipment, or where dusts of an electrically conducting nature may be present. | Division 1 Explosive mixture not normally present, but where deposits of dust may cause heat rise in electrical equipment, or where such deposits may be ignited by arcs or sparks from electrical equipment. | ||||
Group E Metal dust | Group F Carbon black Coal dust Coke dust | Group G Grain dust Flour dust Starch dust Organic dust | Group E Metal dust | Group F Carbon black Coal dust Coke dust | Group G Grain dust Flour dust Starch dust Organic dust |
No type can be used | Use this elevating work platform type: EX | Use this elevating work platform type: EX | No type can be used | No type can be used | Use this elevating work platform type: DS DY ES EE EX GS LPS |
Table 5
Approved Elevating Work Platform Use in Class 3 Locations
Class 3 Locations where easily ignitable fibers or flyings are present but not likely to be in suspension in quantities sufficient to produce ignitable mixtures | |
Division 1 Locations in which easily ignitable fibers or materials producing combustible flyings are handled, manufactured, or used. | Division 2 Locations in which easily ignitable fibers are stored or handled (except in the process of manufacture). |
Use this elevating work platform type: DY EE EX | Use this elevating work platform type: DS DY E ES EE EX GS LPS |
Wash. Admin. Code § 296-869-60015
Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, 49.17.060. 06-19-073, § 296-869-60015, filed 9/19/06, effective 1/1/07.