Section 296-869-40015 - Repairs and adjustments(1) You must make sure repairs to elevating work platforms are: (a) Made by a qualified person; and(b) Done according to the manufacturer's recommendations. (2) You must make sure the elevating work platform, before beginning adjustments or repairs, meets all of the following requirements that apply: (a) All controls in the "off" position;(b) All operating features secured from inadvertent motion by brakes, blocks, or other means;(d) Means of starting is rendered inoperative;(e) Platform either: (i) Lowered to the full down position, if possible; or(ii) Blocked or cribbed to prevent dropping.(f) Hydraulic pressure relieved from all hydraulic circuits before loosening or removing hydraulic components;(g) Safety props or latches installed, where applicable;(h) Other precautions as specified by the manufacturer; and (i) Make sure replacement parts or components are identical or equivalent to the original parts or components.Wash. Admin. Code § 296-869-40015
Amended by WSR 15-23-086, Filed 11/17/2015, effective 12/18/2015Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, 49.17.060. 06-19-073, § 296-869-40015, filed 9/19/06, effective 1/1/07.