Wash. Admin. Code § 296-864-40015
Current through Register Vol. 24-23, December 1, 2024
You must follow the relevant procedures in Table 2, Procedures for Working on Split Rim Wheels and Components.
Table 2 Procedures for Working on Split Rim Wheels and Components
| During these times: | Then: |
| A split rim wheel is in a restraining device. | Make sure employees do not rest or lean any part of the body or equipment on or against the restraining device. |
| Assembly of the wheel and inflation of the tire. | Apply rubber lubricant to bead and rim mating surfaces, unless the tire or wheel manufacturer recommends against it. |
| After tire inflation. | Do both of the following: Inspect the tire and wheel components while still within the restraining device; (()) and Make sure that they are properly seated and locked. |
| When adjusting the tire or wheel components. | Deflate the tire by removal of the valve core before the adjustment is made. |
Wash. Admin. Code § 296-864-40015
Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, 49.17.060. 04-20-079, § 296-864-40015, filed 10/5/04, effective 2/1/05.