Section 296-863-40040 - Meet these requirements when using dock-boards (bridge plates)(1) You must make sure dock-boards are not overloaded:(a) Make sure they are strong enough to carry the load imposed on them.(b) Make sure loads do not exceed the dock-board's rated capacity.(2) You must do the following when using dock-boards:(a) Drive slowly and carefully over dock-boards;(b) Properly secure dock-boards before driving on them.(3) You must make sure powered dock-boards meet the design and construction requirements of U.S. Department of Commerce Commercial Standard CS 202-56 (1961) "Industrial Lifts and Hinged Loading Ramps."(4) You must do the following when using portable dock-boards:(a) Use anchors or other devices that will prevent slipping;(b) Make sure they have handholds or other effective means for safe handling.Wash. Admin. Code § 296-863-40040
Amended by WSR 17-18-075, Filed 9/5/2017, effective 10/6/2017Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, 49.17.060. 04-19-051, § 296-863-40040, filed 9/14/04, effective 2/1/05.