Wash. Admin. Code § 296-848-100

Current through Register Vol. 24-23, December 1, 2024
Section 296-848-100 - Scope

This chapter applies to all occupational exposure to inorganic arsenic.

Definitions:

Inorganic arsenic. Elemental arsenic (As), copper aceto-arsenite, and inorganic compounds containing arsenic (measured as As), except arsine. Inorganic compounds do not contain the element carbon.

Exposure. The contact an employee has with inorganic arsenic, whether or not protection is provided by respirators or other personal protective equipment (PPE). Exposure can occur through various routes of entry such as inhalation, ingestion, skin contact, or skin absorption.

Exemptions:

This chapter does not apply to any of the following:

1. Exposures during agricultural operations.

2. Pesticide applications, including the treatment of wood with preservatives.

3. Use of wood treated with inorganic arsenic.

4. Arsine, a gas identified by Chemical Abstract Service (CAS) Registry No. 7784-42-1.

5. Inorganic arsenic present in a form and handled in such a way that airborne exposures could not occur. For example, inorganic arsenic present in glass is fused in the material. Due to the fused form, airborne exposure can not occur when the glass is scored and subsequently broken.

All requirements in this chapter will not apply to every workplace with an occupational exposure. The following steps will show you which requirements apply to your workplace.

Step 1: Follow requirements in the basic rules sections, WAC 296-848-20010 through 296-848-20090.

* This includes completing an exposure evaluation, as specified in Exposure evaluations, WAC 296-848-20060, to:

- Obtain employee eight-hour exposure monitoring results of airborne inorganic arsenic; and

- Determine if employee exposure monitoring results are above, at, or below these values:

* Eight-hour time-weighted average (TWA8) ....... 10 micrograms per cubic meter ([MICRO]g/m3).

* Eight-hour action level (AL) ........ 5 [MICRO]g/m3.

Step 2: Use employee exposure monitoring results from

Step 1 and follow Table 1 to find out which additional sections of this chapter apply to your workplace.

Table 1 Sections That Apply To Your Workplace

If:Then continue to follow the Basic Rules, and these additional requirements:

* Employee exposure monitoring results are above the TWA8

* Training, exposure monitoring, and medical monitoring, WAC 296-848-30005 through 296-848-30080;

AND

* Exposure control areas, WAC 296-848-40005 through 296-848-40045.

* Employee exposure monitoring results are:

- At or below the TWA8;

AND

- At or above AL

* Training, exposure monitoring, and medical monitoring, WAC 296-848-30005 through 296-848-30080.

* Employee exposure monitoring results are below the AL;

AND

* Eye or skin irritation from exposure to inorganic arsenic cannot occur

* No additional requirements apply if exposures remain stable.
* Employees could experience eye or skin irritation from exposure to inorganic arsenic

* Training in WAC 296-848-30005.

* Washing, showering, and changing in WAC 296-848-40030.

* Personal protective equipment (PPE) in WAC 296-848-40040.

Wash. Admin. Code § 296-848-100

Amended by WSR 18-22-116, Filed 11/6/2018, effective 12/7/2018

Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, and 49.17.060. 06-02-060, § 296-848-100, filed 1/3/06, effective 4/1/06; 05-01-173, § 296-848-100, filed 12/21/04, effective 5/1/05.