Section 296-806-48062 - Make sure molding, sticking and matching machines meet these requirements(1) You must make sure all cutting heads, and saws if used, are covered by a guard that: (b) Forms all or part of the exhaust hood if an exhaust system is used. (2) You must make sure a guard constructed from:(a) Sheet metal is at least one-sixteenth inch thick.(b) Cast iron is at least three-sixteenths inch thick. (3) You must make sure feed rolls are guarded by a hood or other suitable guard that both: (a) Prevents the operator's hand from contacting the in-running rolls at any point; and
(b) Is attached to the frame carrying the rolls so it adjusts for any thickness of stock.Wash. Admin. Code § 296-806-48062
Amended by WSR 15-24-102, Filed 12/1/2015, effective 1/5/2016Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, and 49.17.060. 04-14-028, § 296-806-48062, filed 6/29/04, effective 1/1/05.