Section 296-806-48056 - Make sure jointers with horizontal cutting heads meet these requirements(1) You must make sure the cutting head on hand-fed jointers is cylindrical:(2) You must install and adjust the knife blade so it does not protrude more than one-eighth inch beyond the body of the head. (3) You must make sure the opening in the table meets all of the following: (a) Is kept as small as possible.(b) The clearance between the edge of the rear table and the cutting head is not more than one-eighth inch.(c) The table throat opening is not more than two and one-half inches when the tables are set or aligned with each other for zero cut.Wash. Admin. Code § 296-806-48056
Amended by WSR 15-24-102, Filed 12/1/2015, effective 1/5/2016Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, and 49.17.060. 04-14-028, § 296-806-48056, filed 6/29/04, effective 1/1/05.