Wash. Admin. Code § 296-806-480
Current through Register Vol. 24-23, December 1, 2024
Summary
If your specific machine or operation is not listed here, then be sure to follow any of the following requirements that apply:
| Reference: | For requirements on hand-held tools, see Portable power tools, chapter 296-807 WAC. |
This section applies to fixed machines using saws or cutting heads that are used on any material.
Your responsibility:
To make sure machines using saws and cutting heads meet these requirements.
| Requirements for this topic... | begin with this section: |
| GENERAL REQUIREMENTS FOR ALL SAWS AND CUTTING HEADS | WAC 296-806-48002 |
| SAWS | |
| General Requirements for All | WAC 296-806-48006 |
| Saws | |
| Requirements for All Circular | WAC 296-806-48008 |
| Saws | |
| Requirements for Specific Circular Saws | WAC 296-806-48024 |
| Requirements for Band Saws and Drag Saws | WAC 296-806-48042 |
| CUTTING HEADS | |
| General Requirements for All Cutting Heads | WAC 296-806-48046 |
| BORING AND MORTISING MACHINES | WAC 296-806-48048 |
| CHIPPER AND HOG MILLS | WAC 296-806-48050 |
| JOINTERS | WAC 296-806-48056 |
| MOLDING, STICKING AND MATCHING MACHINES | WAC 296-806-48062 |
| PANEL RAISERS AND OTHER SIMILAR MACHINES | WAC 296-806-48064 |
| PLANERS | WAC 296-806-48066 |
| SHAPERS | WAC 296-806-48074 |
| TENONING MACHINES | WAC 296-806-48076 |
| VENEER MACHINERY | WAC 296-806-48080 |
| SEWING MACHINES | WAC 296-806-48502 |
Wash. Admin. Code § 296-806-480
Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, and 49.17.060. 04-14-028, § 296-806-480, filed 6/29/04, effective 1/1/05.