Statutes, codes, and regulations
Washington Administrative Code
Title 296 - Labor and Industries, Department of
Chapter 296-806 - Machine safety
Section 296-806-46006 - Follow these stopping limit requirements for mills

Wash. Admin. Code § 296-806-46006

Download
PDF
Current through Register Vol. 24-23, December 1, 2024
Section 296-806-46006 - Follow these stopping limit requirements for mills

You must make sure that mills are stopped within one and one-half percent of the fastest speed at which they operate when empty. When mills operate at more than two hundred fifty feet per minute, stopping distances above one and one-half percent of their fastest speed are allowed, but must have engineering support.

Wash. Admin. Code § 296-806-46006

Amended by WSR 15-24-102, Filed 12/1/2015, effective 1/5/2016

Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, and 49.17.060. 04-14-028, § 296-806-46006, filed 6/29/04, effective 1/1/05.