Wash. Admin. Code § 296-806-45503
Current through Register Vol. 24-23, December 1, 2024
| You must meet the requirements... | in this section: |
| Safeguard presses that use unitized tooling | WAC 296-806-45504 |
| Protect operators from guidepost hazards | WAC 296-806-45506 |
| Safeguard the point of operation | WAC 296-806-45508 |
| Make sure point-of-operation guards are properly designed and constructed | WAC 296-806-45510 |
| Make sure barrier guards meet these requirements | WAC 296-806-45512 |
| Make sure point-of-operation devices are effective | WAC 296-806-45514 |
| Make sure presence-sensing devices used to safeguard the point of operation meet these requirements | WAC 296-806-45516 |
| Make sure pull-back devices used to safeguard the point of operation meet these requirements | WAC 296-806-45518 |
| Make sure restraint (holdout) devices used to safeguard the point of operation meet these requirements | WAC 296-806-45520 |
| Make sure two-hand control devices used to safeguard the point of operation meet these requirements | WAC 296-806-45522 |
| Make sure two-hand trip devices used to safeguard the point of operation meet these requirements | WAC 296-806-45524 |
| Provide additional safeguards when the operator puts one or both hands into the point of operation | WAC 296-806-45526 |
Wash. Admin. Code § 296-806-45503