Wash. Admin. Code § 296-806-45012

Current through Register Vol. 24-23, December 1, 2024

Section 296-806-45012 - Guard cutting heads on profile lathes and swing-head lathes

(1) You must cover all cutting heads on profile lathes, swing-head lathes, and heel-turning machines with a metal guard.

(2) You must make sure guards are made of:

(a) Sheet metal at least one-sixteenth inches thick.

(b) Cast iron at least three-sixteenth inches thick.

Wash. Admin. Code § 296-806-45012

Amended by WSR 15-24-102, Filed 12/1/2015, effective 1/5/2016

Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, and 49.17.060. 04-14-028, § 296-806-45012, filed 6/29/04, effective 1/1/05.