Wash. Admin. Code § 296-806-40524

Current through Register Vol. 24-23, December 1, 2024

Section 296-806-40524 - Use blotters when required

EXEMPTION:	You do not need to use a blotter with any of the following:
	1. Mounted wheels (wheels permanently bonded to a shaft or mandrel).
	2. Abrasive disc and Type 2 wheels which are mounted by inserted nuts, inserted washers, or projecting studs.
	3. Plate mounted wheels.
	4. Wheels mounted in chucks (such as cylinders and segmental wheels).
	5. Types 27, 28, and 29 wheels.
	6. Type 1 and Type 27A cutting-off wheels.
	7. Internal wheels less than two inches in diameter.
	8. Diamond and cubic boron nitride wheels with metal or carbon fiber cores.

(1) You must use a blotter between each flange and the abrasive wheel surface to uniformly distribute flange pressure.

(2) You must make sure the blotter covers the entire flange contact area.

(3) You must use a new blotter each time a wheel is mounted unless the wheel has a blotter already attached to it by the manufacturer.

(4) You must make sure scuffed or damaged blotters are not used.

Wash. Admin. Code § 296-806-40524

Amended by WSR 15-24-102, Filed 12/1/2015, effective 1/5/2016

Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, and 49.17.060. 04-14-028, § 296-806-40524, filed 6/29/04, effective 1/1/05.