Wash. Admin. Code § 296-806-40518

Current through Register Vol. 24-23, December 1, 2024

Section 296-806-40518 - Make sure flanges are in good condition

(1) You must make sure flange bearing surfaces are in good condition.

(2) You must replace or remachine a flange with a mounting surface that has any of the following problems:

(a) Warped.

(b) Burred on the bearing surface.

(c) Excessively worn (thickness or diameter).

(d) Out of true.

Reference:

Flanges that are refaced or trued need to satisfy minimum dimension requirements specified in Safety Requirements for the Use, Care and Protection of Abrasive Wheels, ANSI B7.1-2000.

Wash. Admin. Code § 296-806-40518

Amended by WSR 15-24-102, Filed 12/1/2015, effective 1/5/2016

Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, and 49.17.060. 04-14-028, § 296-806-40518, filed 6/29/04, effective 1/1/05.