Wash. Admin. Code § 296-806-30022

Current through Register Vol. 24-23, December 1, 2024

Section 296-806-30022 - Safeguard projections on moving parts

You must safeguard projections on moving parts such as keys, setscrews, bolts, and nuts, by:

(1) Removing them.

(2) Making them flush.

(3) Guarding with metal covers.

EXEMPTION:	This requirement does not apply to keys or setscrews that are:
	1. Within an enclosure.
	2. Below the plane of the rim of a pulley that is less than twenty inches in diameter.
	3. Located where employee contact is not possible.

Wash. Admin. Code § 296-806-30022

Amended by WSR 15-24-102, Filed 12/1/2015, effective 1/5/2016

Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, and 49.17.060. 04-14-028, § 296-806-30022, filed 6/29/04, effective 1/1/05.