Statutes, codes, and regulations
Washington Administrative Code
Title 296 - Labor and Industries, Department of
Chapter 296-56 - Safety standards-Longshore, stevedore and waterfront related operations
Section 296-56-60153 - Hoisting ropes

Wash. Admin. Code § 296-56-60153

Download
PDF
Current through Register Vol. 24-23, December 1, 2024
Section 296-56-60153 - Hoisting ropes

You must make sure hoisting ropes are of good grade elevator traction wire rope and must:

(1) Be at least two ropes of not less than three-eighths inch diameter providing a safety factor of five.
(2) Be fastened by at least three U-type cable clamps with the U on the dead return end of the rope or by approved elevator sockets of the babbitted type.
(3) Be of such length that the car platform will not be more than six inches above the top landing when the counterweight buffer is fully compressed. The counterweight must be six inches or more away from the counterbalance sheave when the car buffer is fully compressed.

Wash. Admin. Code § 296-56-60153

Amended by WSR 15-24-102, Filed 12/1/2015, effective 1/5/2016

Statutory Authority: RCW 49.17.040 and 49.17.050. 86-03-064 (Order 86-02), § 296-56-60153, filed 1/17/86; 85-01-022 (Order 84-24), § 296-56-60153, filed 12/11/84.