Statutes, codes, and regulations
Washington Administrative Code
Title 296 - Labor and Industries, Department of
Chapter 296-54 - Safety standards-Logging operations
Section 296-54-51120 - Eye and face protection

Wash. Admin. Code § 296-54-51120

Download
PDF
Current through Register Vol. 24-23, December 1, 2024
Section 296-54-51120 - Eye and face protection

You must provide, at no cost to the employee, and ensure that each employee wears:

(1) Eye protection meeting the requirements of WAC 296-800-160, where there is potential for eye injury from falling or flying objects; and
(2) Face protection meeting the requirements of WAC 296-800-160, where there is potential for facial injury such as, but not limited to, operating a chipper. An employee using a chain saw may use either eye or face protection.

Note:

The employee does not have to wear separate eye protection when the face protection also covers the eyes.

Note:

Mesh type screen goggles or face shields, which conform to ANSI Z87.1, may be used while operating a chain saw or during chipping operations.

Wash. Admin. Code § 296-54-51120

Amended by WSR 17-17-131, Filed 8/22/2017, effective 10/22/2017

Statutory Authority: RCW 49.17.010, [49.17].040, and[49.17].050 . 01-11-038, § 296-54-51120, filed 5/9/01, effective 9/1/01; 99-17-117, § 296-54-51120, filed 8/18/99, effective 12/1/99.