Section 296-150M-0350 - What must the test procedures and results for design plans include?(1) Tests to an alteration design must be performed and evaluated by a professional engineer or architect licensed in Washington or by a DAPIA who approved the original design plan.(2) Test reports must contain the following items:(a) A description of the methods or standards that applied to the test;(b) Drawings and a description of the item tested;(c) A description of the test set-up;(d) The procedure used to verify the correct load;(e) The procedure used to measure each condition;(f) Test data, including applicable graphs and observations of the characteristics and behavior of the item tested;(g) Engineering data; and(h) Analysis, comments, and conclusion.(3) The written test procedures, results, and conclusions must reference the applicable structural alteration design plan.Wash. Admin. Code § 296-150M-0350
Statutory Authority: RCW 43.22.340, [43.22.]355, [43.22.]360, [43.22.]432, [43.22.]440 and [43.22.]480. 96-21-146, § 296-150M-0350, filed 10/23/96, effective 11/25/96.