Section 288.3 - Water Conservation Plans for Industrial or Mining Use(a) A water conservation plan for industrial or mining uses of water must provide information in response to each of the following elements. If the plan does not provide information for each requirement, the industrial or mining water user shall include in the plan an explanation of why the requirement is not applicable. (1) a description of the use of the water in the production process, including how the water is diverted and transported from the source(s) of supply, how the water is utilized in the production process, and the estimated quantity of water consumed in the production process and therefore unavailable for reuse, discharge, or other means of disposal;(2) specific, quantified five-year and ten-year targets for water savings and the basis for the development of such goals. The goals established by industrial or mining water users under this paragraph are not enforceable;(3) a description of the device(s) and/or method(s) within an accuracy of plus or minus 5.0% to be used in order to measure and account for the amount of water diverted from the source of supply;(4) leak-detection, repair, and accounting for water loss in the water distribution system;(5) application of state-of-the-art equipment and/or process modifications to improve water use efficiency; and(6) any other water conservation practice, method, or technique which the user shows to be appropriate for achieving the stated goal or goals of the water conservation plan.(b) An industrial or mining water user shall review and update its water conservation plan, as appropriate, based on an assessment of previous five-year and ten-year targets and any other new or updated information. The industrial or mining water user shall review and update the next revision of its water conservation plan every five years to coincide with the regional water planning group.30 Tex. Admin. Code § 288.3
The provisions of this §288.3 adopted to be effective May 3, 1993, 18 TexReg 2558; amended to be effective April 27, 2000, 25 TexReg 3544; amended to be effective October 7, 2004, 29 TexReg 9384; amended to be effective December 6, 2012, 37 TexReg 9515