Section 1200-03-22-.04 - STANDARDS FOR NEW OR MODIFIED SOURCES OF LEAD(1) A new source the actual emissions of which are in excess of 5.0 tons per year of lead or lead compounds measured as elemental lead shall utilize best available control technology (BACT).(2) Any modification of a lead point source which results in an increase in excess of 0.6 tons per year of lead or lead compounds measured as elemental lead shall utilize BACT.(3) The owner or operator of a proposed new or modified source of lead shall perform a source impact analysis to demonstrate that the allowable emission increases from the proposed source or modification would not cause or contribute to a violation of the lead ambient air quality standard in the source impact area including background concentrations. Source impact analysis shall be based on the applicable air quality models and data bases acceptable to the Technical Secretary.(4) Additional requirements for certain new or modified sources of lead are given in paragraph (4) of Rule 1200-03-09-.01 and in Chapter 0400-30-39.Tenn. Comp. R. & Regs. 1200-03-22-.04
Original rule filed November 5, 1984; effective December 5, 1984. Amendment filed September 22, 1988; effective November 6, 1988. Amendments filed September 16, 2024; effective 12/15/2024.Authority: T.C.A. §§ 4-5-201, et seq.; 68-25-105; and 68-201-101, et seq.