Section 0820-04-.08 - SEALS(1) The design of the registrant's seal required by T.C.A. §§62-18-119, shall be as follows: Click to view Image
(2) The seal and signature of the registrant and the date of signing shall be placed on all land surveys, reports, plats, drawings, plans, and calculations whenever presented to a client or any public agency to certify that the work thereon was done by the registrant or under the responsible charge of the registrant. Working drawings or preliminary documents are not required to have a seal and signature if the working drawing or preliminary document contains a statement in large bold letters to the effect "PRELIMINARY, NOT FOR CONSTRUCTION, RECORDING PURPOSES, OR IMPLEMENTATION." The size of the seal shall be two inches in diameter in all cases and on all documentation requiring the registrant's seal, regardless of the size of the document.(3) The registrant shall superimpose his or her signature (not a rubber stamp) and date of signature across the face and beyond the circumference of or adjacent to the seal on documents to which the registrant's seal is affixed.(4) The seal and signature shall be placed on all original copies, tracings, or other reproducible documents so that the seal and signature will be reproduced when copies are made.(5) When the document contains more than one sheet, the first or title page shall be sealed and signed by the registrant who was in responsible charge. In addition, each sheet shall be sealed and signed by the registrant or registrants responsible for that sheet. Two or more registrants may affix their signatures and seals, provided that the registrants designate by note under the seals the specific subject matter for which each is responsible. When a firm performs the work, each sheet shall be sealed and signed by the registrant or registrants who were in responsible charge of that sheet as required by T.C.A. § 62-18-122(b).(6) The seal and signature shall be placed on work only when it was under the registrant's responsible charge. The registrant shall sign and seal only work within the registrant's area(s) of competence.(7) Maps, plats, surveys, or other documents will be deemed to have been prepared under the responsible charge of a registrant only when all the following conditions have been met and documented: (a) The client requesting preparation of such maps, plats, surveys, or other documents makes the request directly to the registrant, or a member or employee of the registrant's firm;(b) The registrant supervises the preparation of the maps, plats, surveys, or other documents and has input into their preparation prior to their completion;(c) The registrant reviews the final maps, plats, surveys, or other documents; and(d) The registrant has the authority to, and does, make any necessary and appropriate changes to the final maps, plats, surveys, or other documents. The registrant is responsible for meeting all of the preceding requirements whether the work is being performed remotely or locally.(8) Any revision to a document containing the seal and signature of a registrant shall be described and dated in a manner that conforms to current industry standards. If the revisions are not done by the original registrant, the revisions must also be signed and sealed by the registrant in responsible charge of those revisions and otherwise identified in the same manner.(9) In circumstances where a registrant in responsible charge of the work is unavailable to complete the work, a successor registrant may take responsible charge by performing all professional services to include developing maps, plats, surveys or other documents and any necessary and appropriate changes to the work. The non-professional services, such as drafting, need not be redone by the successor registrant but must clearly and accurately reflect the successor registrant's work. The burden is on the successor registrant to show such compliance. The successor registrant shall have control of and responsibility for the work product and the signed and sealed originals of all documents.(10) Computer-generated seals not signed with a digital signature may be used on final original drawings provided a handwritten signature is placed across the seal and the date is handwritten below the seal. Maps, plats, surveys or other documents that are signed using a digital signature must have an electronic authentication process attached to or logically associated with the electronic document. The digital signature must be:(a) Unique to the individual using it;(b) Capable of verification;(c) Under the sole control of the individual using it; and,(d) Linked to a document in such a manner that the digital signature is invalidated if any data in the document is changed. A digital signature that uses a process approved by the board will be presumed to meet the criteria set forth in subsections 10 a-d above. Any hard copy printed from the transmitted electronic file shall bear the facsimile of the signature and seal and shall be a confirmation that the electronic file was not altered after the initial digital signing of the file. Any alterations to the file shall cause the facsimile of the signature to be voided.
Tenn. Comp. R. & Regs. 0820-04-.08
Original rule filed November 20, 1991; effective January 4, 1992. Repeal and new rule filed November 17, 2014; effective 2/15/2015.Authority: T.C.A. §§ 62-18-105(d), 62-18-106(c), and 62-18-119(d).