S.C. Code Regs. § § 61-107.19.V.C.258.20

Current through Register Vol. 48, No. 10, October 25, 2024

Section 61-107.19.V.C.258.20 - Procedures for Excluding the Receipt of Hazardous Waste and Special Waste

a. Owners/operators of all Class Three landfills shall implement a program at the facility for detecting and preventing the disposal of regulated hazardous wastes as defined in the South Carolina Hazardous Waste Management RegulationsR.61-79.261 and polychlorinated biphenyls (PCB) wastes as defined in Toxic Substances Control Act (TSCA), Part 761. This program shall be a part of the Special Waste Analysis and Implementation Plan (SWAIP) and shall include, at a minimum:

(1) Random daily inspections of no less than 10% of incoming loads unless the permittee takes other steps as outlined in the SWAIP to ensure that incoming loads do not contain regulated hazardous wastes, PCB wastes, or wastes not specifically allowed by the permit. Bulk PCB wastes may be allowed for disposal in a Class Three landfill based on a case-by-case determination by the Department;

(2) Records of unacceptable waste to include quantities and descriptions of waste, generator information, and how/where waste was properly disposed;

(3) Training of facility personnel to recognize regulated hazardous waste and PCB wastes; and,

(4) Notification of the Department within 72 hours of facility personnel becoming aware that a regulated hazardous waste or PCB waste may have been disposed of at the facility.

b. Definitions. See Part I., Section B. for definitions that apply to this regulation.

c. The owners/operators of all Class Three landfills shall implement a program at the facility for regulating the receipt of special wastes as described in SC Code Section 44-96-390.

S.C. Code Regs. § 61-107.19.V.C.258.20