Current through Register Vol. 54, No. 45, November 9, 2024
Section 47.398 - General specifications(a)Buildings. All buildings, structures or enclosures covered by this subchapter shall be designed and constructed requiring the installation of safety glazing materials which meet the requirements of ANSI Standard Z-97. 1-1966 in all openings glazed and known as glass entrance doors, sliding glass doors, storm doors, bathtub enclosures and fixed glazed panels adjacent to entrance and exit doors, whether or not such glazing is transparent, except those glazing materials used as the curved panel in revolving doors.(b)Labeling. Each light of safety glazing material manufactured, distributed, imported or sold for use in hazardous locations or installed in such a location within the Commonwealth, shall be permanently labeled by the means as etching, sandblasting, firing of ceramic material on the safety glazing material or by other suitable means. The label shall identify the labeler, whether manufacturer, fabricator or installer, and the nominal thickness and the type of safety glazing material and the fact that said material meets the test requirements of USA Standard Z-97.1-1966 (now ANSI) and such further requirements as may be adopted by the Department. The label shall be legible and visible after installation.(c)Posting, painting or marking. Transparent glass or plastic doors in commercial or public places in buildings open to the public, must in addition to use of safety glazing materials; be posted, painted or otherwise marked so as to alert the public as to their presence in accordance with standards, rules and regulations of the Department. The posting, painting or marking shall also be required in those places previously glazed with nonsafety glazing materials, prior to the effective date of the act of June 2, 1971 (P. L. 115, No. 5) (35 P. S. § 5811).(d)Violation of standards. It shall be unlawful, for use in the Commonwealth, to knowingly sell, fabricate, assemble, glaze, include in specifications, install or consent to be installed any product commonly known as a sliding glass door, entrance door, fixed glazed panel adjacent to an entrance door which may be mistaken for means of ingress or egress, storm door, shower door, tub enclosure, or any other glazed structure for use in any hazardous locations, where said product, glazing material, or glazed structure contains any glass or glazing product other than safety glazing material.The provisions of this §47.398 amended January 26, 1979, 9 Pa.B. 314.