Current through Register Vol. 54, No. 49, December 7, 2024
Section 127.13a - Plan approval changes for causeA plan approval may be terminated, modified, suspended or revoked and reissued if one or more of the following applies:
(1) The permittee constructs or operates the source subject to the plan approval in violation of the act, the Clean Air Act, the regulations promulgated under the act or the Clean Air Act, a plan approval or permit or in a manner that causes air pollution.(2) The permittee fails to properly or adequately maintain or repair an air pollution control device or equipment attached to or otherwise made a part of the source.(3) The permittee fails to submit a report required by the plan approval.(4) The EPA determines that the plan approval is not in compliance with the Clean Air Act or the regulations thereunder.The provisions of this § 127.13a adopted November 25, 1994, effective 11/26/1994, 24 Pa.B. 5899.