Or. Admin. Code § 918-225-0730
Current through Register Vol. 63, No. 11, November 1, 2024
Section 918-225-0730 - Requirements for Businesses Doing Welding or BrazingAll persons in the business of installing, altering or repairing boilers, pressure vessels, or pressure piping shall develop and maintain a quality control system before doing welding or brazing:
(1) Boilers and pressure vessels. For welding on a boiler, boiler external piping as defined by ORS 480.515 and pressure vessels, the person shall develop and maintain a quality control system under the "R" Stamp requirements of the National Board Inspection Code.(2) Pressure piping. For welding or brazing on pressure piping, the person shall develop and maintain a quality control system under either Section (1) of this rule or under OAR 918-225-0740.Or. Admin. Code § 918-225-0730
BCA 6-1990, f. & cert. ef. 3-13-90; BCA 24-1991(Temp), f. 7-3-91, cert. ef. 7-1-91; BCA 30-1991, f. & cert. ef. 9-9-91; BCA 36-1993, f. 12-30-93, cert. ef. 1-1-94; Renumbered from 918-225-0195; BCD 18-1997, f. 12-3-97, cert. ef. 1-1-98; BCD 16-1998, f. 9-30-98, cert. ef. 10-1-98; BCD 35-2000, f. 12-29-00, cert. ef. 7-1-01Publications: The publication(s) referenced in this rule is available from the agency.
Stat. Auth.: ORS 480.545 & ORS 480.647
Stats. Implemented: ORS 480.545 & ORS 480.647