Or. Admin. Code § 257-040-0020

Current through Register Vol. 63, No. 12, December 1, 2024

Section 257-040-0020 - Return of a Device to a Distributor

(1) On the return of a device to a distributor, the distributor must:

(a) Test the device for minimum power and so indicate on the user log;

(b) Visually inspect the device for external signs of damage and so indicate on the user log;

(c) Visually inspect the seal on the device and record the seal number on the user log;

(d) Enter his or her initials on the "Check In Procedures" portion of the user log.

(2) These rules impose only minimum requirements. Nothing in theses rules is intended to prevent distributors from using additional forms, agreements or leases, or from requiring compensation for use of the devices.

(3) Distributor may use their own instructions, forms, logos and letterheads as written device instructions, user's fact sheets and users logs. However, any user's fact sheets and user logs shall contain, as a minimum, the information set forth in Exhibits 1 and 2, which are incorporated into theses rules.

Or. Admin. Code § 257-040-0020

OSP 1-1988(Temp), f. 4-11-88, cert. ef. 4-8-88; OSP 2-1988, f. 8-17-88, cert. ef. 10-1-88

The Exhibit(s) referenced in this rule is not printed in the OAR Compilation. Copies are available from the agency.

Stat. Auth.: ORS 401.635

Stats. Implemented: ORS 401.605 - ORS 401.635