Okla. Admin. Code § 35:37-9-20

Current through Vol. 42, No. 6, December 2, 2024

Section 35:37-9-20 - Affixing of official identification

(a) No official identification or any abbreviation, copy, or representation thereof may be affixed to or placed on or caused to be affixed to or placed on any product or container thereof except by an inspector or under the authorization of an inspector. All such products shall have been inspected and passed. The inspector shall have supervision over the use and handling of all material bearing any official identification.

(b) Each container of inspected and passed products to be shipped from one official plant to another official plant for further processing shall be marked for identification and shall show the following information:

(1) The name of the inspected and passed products in the container;

(2) The name and address of the packer or distributor of the products;

(3) The net weight of the container;

(4) The inspection mark permitted to be used pursuant to the regulations in this Part unless the containers are sealed or identified in a manner as may be approved by the Department; and

(5) The plant number of the official plant where the products were packed.

(6) A handling statement such as keep refrigerated, or keep frozen for all perishable product.

Okla. Admin. Code § 35:37-9-20

Added at 21 Ok Reg 1181, eff 5-27-04