Statutes, codes, and regulations
Ohio Administrative Code
Title 3745 - Ohio Environmental Protection Agency
Chapter 3745-51 - Identification and Listing of Hazardous Waste
Section 3745-51-24 - Toxicity characteristic

Ohio Admin. Code 3745-51-24

Download
PDF
Current through all regulations passed and filed through November 4, 2024
Section 3745-51-24 - Toxicity characteristic
(A) A waste (except manufactured gas plant waste) exhibits the characteristic of toxicity if, using the toxicity characteristic leaching procedure, test method 1311 in "Test Methods for Evaluating Solid Waste, Physical/Chemical Methods," U.S. EPA publication SW-846, the extract from a representative sample of the waste contains any of the contaminants listed in the table in this rule at a concentration equal to or greater than the respective value given in that table. Where the waste contains less than 0.5 per cent filterable solids, the waste itself, after filtering using the methodology outlined in method 1311, is considered to be the extract for the purposes of this rule.
(B) A waste that exhibits the characteristic of toxicity has the EPA hazardous waste number specified in the table in this rule which corresponds to the toxic contaminant that causes the waste to be hazardous.

Table

Maximum Concentrations of Contaminants for the Toxicity Characteristic

EPA Haz. Waste Number

Contaminant

CAS1 Number

Regulatory Level (mg/L)

D004

Arsenic

7440-38-2

5.0

D005

Barium

7440-39-3

100.0

D018

Benzene

71-43-2

0.5

D006

Cadmium

7440-43-9

1.0

D019

Carbon tetrachloride

56-23-5

0.5

D020

Chlordane

57-74-9

0.03

D021

Chlorobenzene

108-90-7

100.0

D022

Chloroform

67-66-3

6.0

D007

Chromium

7440-47-3

5.0

D023

o-Cresol

95-48-7

200.03

D024

m-Cresol

108-39-4

200.03

D025

p-Cresol

106-44-5

200.03

D026

Cresol

----------

200.03

D016

2,4-D

94-75-7

10.0

D027

1,4-Dichlorobenzene

106-46-7

7.5

D028

1,2-Dichloroethane

107-06-2

0.5

D029

1,1-Dichloroethylene

75-35-4

0.7

D030

2,4-Dinitrotoluene

121-14-2

0.132

D012

Endrin

72-20-8

0.02

D031

Heptachlor (and its epoxide)

76-44-8

0.008

D032

Hexachlorobenzene

118-74-1

0.132

D033

Hexachlorobutadiene

87-68-3

0.5

D034

Hexachloroethane

67-72-1

3.0

D008

Lead

7439-92-1

5.0

D013

Lindane

58-89-9

0.4

D009

Mercury

7439-97-6

0.2

D014

Methoxychlor

72-43-5

10.0

D035

Methyl ethyl ketone

78-93-3

200.0

D036

Nitrobenzene

98-95-3

2.0

D037

Pentachlorophenol

87-86-5

100.0

D038

Pyridine

110-86-1

5.02

D010

Selenium

7782-49-2

1.0

D011

Silver

7440-22-4

5.0

D039

Tetrachloroethylene

127-18-4

0.7

D015

Toxaphene

8001-35-2

0.5

D040

Trichloroethylene

79-01-6

0.5

D041

2,4,5-Trichlorophenol

95-95-4

400.0

D042

2,4,6-Trichlorophenol

88-06-2

2.0

D017

2,4,5-TP (Silvex)

93-72-1

1.0

D043

Vinyl chloride

75-01-4

0.2

1 Chemical abstracts service number.

2 Quantitation limit is greater than the calculated regulatory level. The quantitation limit therefore becomes the regulatory level.

3 If o-, m-, and p-Cresol concentrations cannot be differentiated, the total cresol (D026) concentration is used. The regulatory level of total cresol is 200 mg/L.

[Comment: For dates of non-regulatory government publications, publications of recognized organizations and associations, federal rules, and federal statutory provisions referenced in this rule, see rule 3745-50-11 of the Administrative Code titled "Incorporated by reference."]

Ohio Admin. Code 3745-51-24

Effective: 9/29/2021
Five Year Review (FYR) Dates: 6/7/2021 and Exempt
Promulgated Under: 119.03
Statutory Authority: 3734.12
Rule Amplifies: 3734.12
Prior Effective Dates: 04/15/1981, 05/22/1981 (Emer.), 08/26/1981 (Emer.), 12/02/1981, 05/29/1985 (Emer.), 08/29/1985, 03/31/1992, 02/14/1995, 09/02/1997, 12/07/2004, 02/16/2009, 10/31/2015