Section 1501:9-12-01 - Referenced industry standardsThis rule lists the industry standards that are referenced in division 1501:9 of the Administrative Code. Such standards shall be incorporated by reference into and considered part of the requirements of these rules to the prescribed extent of each such reference.
The industry standards are listed herein by the organization setting the standard, the standard identification number and title, the date, and, if available, the edition of the publication.
(A) American petroleum institute (API) standards. The website for API is http://www.api.org/. The address for API is "200 Massachusetts Avenue NW, Suite 1100, Washington, DC 20001-5571" The following API standards are referenced in these rules: (1) "5 CT for Casing and Tubing," tenth edition, dated June 2018;(2) "TR 5C3 Calculating Performance Properties of Pipe Used as Casing or Tubing," seventh edition, dated June 2018; (3) "10 A Cements and Materials for Well Cementing," twenty-fifth edition, dated March 2019; (4) "RP 10 B-2 Recommended Practice for Testing Well Cements." second edition, dated April 2013; (5) "10 D Specification for Bow-Spring Casing Centralizers," sixth edition, dated March 2002;(6) "10 TR 4 Selection of Centralizers for Primary Cementing Operations," first edition, dated May 2008; (7) "65-2 Isolating Potential Flow Zones during Well Construction," second edition, dated December 2010 .(B) ASTM standards. The website for ASTM international is http://www.astm.org/. The address for ASTM international world headquarters is "100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA, 19428-2959." The following ASTM standards are referenced in these rules:(1) "A500/A 500 M Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes," dated 2020;.(2) "C 150/C 150 M Standard Specification for Portland Cement," dated 2020.(3) "C33 / C33M-18 Standard Specification for Concrete Aggregates," dated 2018.(C) National geodetic survey (NGS) datum. The website for national geodetic survey is http://www.ngs.noaa.gov/. The address for the national geodetic survey is "SSMC3, 1305 East-West Hwy, Silver Spring, MD 20910." The following NGS datum are referenced in this chapter: (1) "North American Datum of 1983."(2) "North American Vertical Datum 1988."(E) "Rainwater and Land Development: Ohio's Standards for Stormwater Management, Land Development and Urban Stream Protection." The manual may be obtained in its entirety at https://epa.ohio.gov/dsw/storm/rainwater, third edition 2006, updated as of August 1, 2020. (F) National flood insurance rate map. The website for the FEMA flood insurance rate map is https://msc.fema.gov/. The address for the FEMA map service center is "P.O. Box 3617 Oakton, Virginia 22124-9617."(G) American national standards institute (ANSI) standards. The website for American national standards institute is http://ansi.org/. The address for ANSI headquarters is "1899 L street, NW, 11th floor, Washington, DC, 20036." The following ANSI standards are referenced in this chapter: "ANSI/ASME Y 14.1," dated 2012. (H) Source water assessment and protection program. The website for the Ohio environmental protection agency's source water assessment and protection program is http://www.epa.state.oh.us/ddagw/swap.aspx. The address for the Ohio environmental protection agency is 50 West town street, suite 700, Columbus, OH 43215.Ohio Admin. Code 1501:9-12-01
Effective: 1/1/2021
Five Year Review (FYR) Dates: 10/13/2020 and 01/01/2026
Promulgated Under: 119.03
Statutory Authority: 1509.03
Rule Amplifies: 1509.02
Prior Effective Dates: 08/01/2012, 07/16/2015