Section 8-06-01-03 - Use of the stamp1. The stamp shall be imprinted on all documents prepared by the licensed architect or landscape architect to be used for construction or technical submissions whether the project or building type is exempt or not exempt under North Dakota statutes.2. Documents to be used for construction shall be imprinted as follows:a. On each final drawing sheet; andb. On the cover, title, certification, or index page or each set of the project manual or specifications.3. Documents to be used for technical submissions shall be imprinted as follows: a. On each final design drawing; andb. On the cover, title, certification, or index page of each set.4. Letter-formatted reports or professional opinions shall be imprinted at the end of the letter in the area of the letter's salutation.5. The original signature of the licensed architect or landscape architect named on the stamp shall appear across the face of each original stamp imprint, along with the date of signing. This signature may be either digital or wet. Documents with digital stamp, signature, and date that are submitted for building permitting shall have a wet signature and date written over the digital stamp, signature, and date. This requirement is for any project or building type whether exempt or not exempted under statutes of North Dakota. The digital signature with date and the wet stamp shall approximate the format shown below:Click here to view image.
6. The stamp appearing on any drawings, project manual or specification, technical submissions, or letter-formatted reports or opinions shall be prima facie evidence that said technical submission was prepared by or under the responsible control of the individual name on the stamp only if the stamp has been signed and dated.N.D. Admin Code 8-06-01-03
Effective January 1, 2014.General Authority: NDCC 43-03-08
Law Implemented: NDCC 43-03-22