Section 37-12-02-01 - General considerations1.Scope. Vehicles constructed, reconstructed, or modified shall comply with all provisions of North Dakota Century Code chapter 39-21 and any other applicable provision of North Dakota Century Code title 39, unless specifically excepted. The requirements of this chapter shall not supersede the original and unaltered design, construction, or equipment standards of motor vehicles manufactured by a recognized manufacturer. 2.Definitions. The terms used throughout this chapter have the same meaning as in North Dakota Century Code title 39, except: a. "Recognized manufacturer" means a manufacturer of motor vehicles intended for use on the public roadways and for distribution and sale in interstate commerce. b. "Recognized manufacturer or assembler" means every fabricator of a special vehicle assembled in its entirety as a complete product for use on the public roadways. c. "Special motor vehicles" means those passenger vehicles and trucks with an unladen weight of six thousand pounds [2721.55 kilograms] or less equipped with two or more axles having at least two wheels per axle, and which are intended for use on public highways. The term "special motor vehicle" includes the following types: (1) Type I - Those vehicles which are restored to or retain their original configuration but which may contain changed steering, brake, power train, or suspension systems. (2) Type II - Those vehicles changed from the recognized vehicle manufacturer's original body configuration but which retain the general appearance, including changes to the body chassis or engine of the original vehicle. This type may also include changes and modifications to engine, chassis, brake system, power train, steering, and suspension systems. (3) Type III - Other than type I and type II special vehicles, those vehicles custom built with fabricated parts, or parts taken from existing vehicles. 3.Manufacturer's certification. The manufacturer or assembler of a special vehicle (type I, II, or III) shall provide a certification of fact that the vehicle is designed and manufactured for use on the public roadway and complies with the performance and equipment requirements of this chapter. Nothing contained in this chapter shall preclude the motor vehicle division director from requiring a certificate of inspection to ensure compliance with the standard. N.D. Admin Code 37-12-02-01
General Authority: NDCC 39-02-03
Law Implemented: NDCC 39-02-03