N.Y. Comp. Codes R. & Regs. tit. 6 § 371.4

Current through Register Vol. 46, No. 50, December 11, 2024
Section 371.4 - Lists of hazardous wastes
(a)General.
(1) A solid waste is a hazardous waste if it is listed in this section, unless it has been excluded from this list under section 370.3(a) and (b) of this Title.

Note:

Although the names used for chemicals in this list include common names, trade names and specific isomer names under various chemical naming systems, where any one of these previous names are used, all other equivalent names shall be considered to be listed.

(2) The commissioner will indicate the basis for listing the classes or types of wastes listed in this section by employing one or more of the following hazard codes:

Ignitable waste ... (I)............................................................................................

Corrosive waste .. (C)........................................................................................

Reactive waste .. (R)..........................................................................................

Toxicity characteristic waste .. (E)....................................................................

Acute hazardous waste .. (H).............................................................................

Toxic waste .. (T).................................................................................................

Appendix 22, infra, identifies the constituent which caused the commissioner to list the waste as a toxicity characteristic waste (E) or toxic waste (T) in subdivisions (b) and (c) of this section.

(3) Each hazardous waste listed in this section is assigned an EPA hazardous waste number which precedes the name of the waste. This number must be used in complying with the notification requirements of section 3010 of the Resource Conservation and Recovery Act and certain recordkeeping and reporting requirements under Parts 372, 373 and 376 (see section 370.1[e] of this Title).
(4) The following hazardous wastes listed in subdivision (b) of this section are subject to the exclusion limits for acutely hazardous waste established in section 371.1(f) of this Part: EPA hazardous waste numbers F020, F021, F022, F023, F026 and F027.
(b)Hazardous waste from nonspecific sources.
(1) The following solid wastes are listed hazardous wastes from nonspecific sources unless they are excluded under section 370.3(a) and (c) of this Title and listed in Appendix 24, infra:

Industry and
EPA hazardousHazard
waste numberHazardous wastecode
Generic:
F001The following spent halogenated solvents used in degreasing: tetrachloroethylene, trichloroethylene, methylene chloride, 1,1, 1-trichloroethane, carbon tetrachloride, and chlorinated fluorocarbons; all spent solvent mixtures/blends used in degreasing containing, before use, total of 10 percent or more (by volume) of one or more of the above halogenated solvents or those solvents listed in F002, F004 and F005; and still bottoms from the recovery of these spent solvents and spent solvent mixtures.(T)
F002The following spent halogenated solvents: tetrachloro-ethylene, methylene chloride, trichloroethylene, 1,1,1-trichloroethane, chlorobenzene, 1,1,2-trichloro-1,2,2- trifluoroethane, orthodichlorobenzene, trichlorofluoromethane and 1,1,2-trichloroethane; all spent solvent mixtures/blends containing, before use, a total of 10 percent or more (by volume) of one or more of the above halogenated solvents or those listed in F001, F004 or F005; and still bottoms from the recovery of these spent solvents and spent solvent mixtures.(T)
F003The following spent nonhalogenated solvents: xylene, acetone, ethyl acetate, ethyl benzene, ethyl ether, methyl isobutyl ketone, n-butyl alcohol, cyclohexanone, and methanol; all spent solvent mixtures/blends containing, before use, only the above spent nonhalogenated solvents; and all spent solvent mixtures/blends containing, before use, one or more of the above nonhalogenated solvents, and a total of 10 percent or more (by volume) of one or more of those solvents listed in F001, F002, F004 and F005; and still bottoms from the recovery of these spent solvents and spent solvent mixtures.(I)*
F004The following spent nonhalogenated solvents: cresols and cresylic acid, and nitrobenzene; all spent solvent mixtures/blends containing, before use, a total of 10 percent or more (by volume) of one or more of the above nonhalogenated solvents or those solvents listed in F001, F002 and F005; and still bottoms from the recovery of these spent solvents and spent solvent mixtures.(T)
F005The following spent nonhalogenated solvents: toluene, methyl ethyl ketone, carbon disulfide, isobutanol, and pyridine, benzene, 2-ethoxyethanol, and 2-nitropropane; all spent solvent mixtures/blends containing, before use, a total of 10 percent or more (by volume) of one or more of the above nonhalogenated solvents or those solvents listed in F001, F002 or F004; and still bottoms from the recovery of these spent solvents and spent solvent mixtures.(I,T)
F006Wastewater treatment sludges from electroplating operations, except from the following processes: (1) sulfuric acid anodizing of aluminum; (2) tin plating on carbon steel; (3) zinc plating (segregated basis) on carbon steel; (4) aluminum or zinc-aluminum plating on carbon steel; (5) cleaning/stripping associated with tin, zinc and aluminum plating on carbon steel; and (6) chemical etching and milling of aluminum.(T)
F007Spent cyanide plating bath solutions from electroplating operations.(R,T)
F008Plating bath residues from the bottom of plating baths from electroplating operations where cyanides are used in the process.(R,T)
F009Spent stripping and cleaning bath solutions from electroplating operations where cyanides are used in the process.(R,T)
F010Quenching bath residues from oil baths from metal heat treating operations where cyanides are used in the process.(R,T)
F011Spent cyanide solutions from salt bath pot cleaning from metal heat treating operations.(R,T)
F012Quenching wastewater treatment sludges from metal heat treating operations where cyanides are used in the process.(T)
F019Wastewater treatment sludges from the chemical conversion coating of aluminum except from zirconium phosphating in aluminum can washing when such phosphating is an exclusive conversion coating process. Wastewater treatment sludges from the manufacturing of motor vehicles using a zinc phosphating process will not be subject to this listing at the point of generation if the wastes are not placed on the land prior to shipment to a landfill for disposal and are either: disposed in a municipal or industrial landfill unit that is equipped with at least a single clay liner and is permitted, licensed or otherwise authorized by the state; or disposed in a landfill unit subject to, or otherwise meeting, the landfill requirements in Parts 360 and 363 of this Title and sections 373-2.15(c) and 373-3.14(j) of this Title. For the purposes of this listing, motor vehicle manufacturing is defined in clause (2)(iv)(a) of this subdivision, clause (2)(iv)(b) of this subdivision describes the recordkeeping requirements for motor vehicle manufacturing facilities.(T)
F020Wastes (except wastewater and spent carbon from hydrogen chloride purification) from the production or manufacturing use (as a reactant, chemical intermediate, or component in a formulating process) of tri- or tetrachlorophenol, or of intermediates used to produce their pesticide derivatives. (This listing does not include wastes from the production of hexachlorophene from highly purified 2,4,5-trichlorophenol.)(H)
F021Wastes (except wastewater and spent carbon from hydrogen chloride purification) from the production or manufacturing use (as a reactant, chemical intermediate, or component in a formulating process) of pentachlorophenol, or of intermediates used to produce its derivatives.(H)
F022Wastes (except wastewater and spent carbon from hydrogen chloride purification) from the manufacturing use (as a reactant, chemical intermediate, or component in a formulating process) of tetra-, penta-, or hexachlorobenzenes under alkaline conditions.(H)
F023Wastes (except wastewater and spent carbon from hydrogen chloride purification) from the production of materials on equipment previously used for the production or manufacturing use (as a reactant, chemical intermediate, component in a formulating process) of tri- and tetra-chlorophenols. (This listing does not include wastes from equipment used only for the production or use of hexachlorophene from highly purified 2,4,5-trichlorophenol.)(H)
F024Process wastes, including but not limited to, distillation residues, heavy ends, tars, and reactor clean-out wastes, from the production of certain chlorinated aliphatic hydrocarbons by free radical catalyzed processes. These chlorinated aliphatic hydrocarbons are those having carbon chain lengths ranging from one to and including five, with varying amounts and positions of chlorine substitution. (This listing does not include wastewaters, wastewater treatment sludges, spent catalysts, and wastes listed in subdivision [b] or [c] of this section.)(T)
F025Condensed light ends, spent filters and filter aids, and spent desiccant wastes from the production of certain chlorinated aliphatic hydrocarbons, by free radical catalyzed processes. These chlorinated aliphatic hydrocarbons are those having carbon chain lengths ranging from one to and including five, with varying amounts and positions of chlorine substitution.(T)
F026Wastes (except wastewater and spent carbon from hydrogen chloride purification) from the production of materials on equipment previously used for the manufacturing use (as a reactant, chemical intermediate, or component in a formulating process) of tetra-, penta-, or hexachlorobenzene under alkaline conditions.(H)
F027Discarded unused formulations containing tri-, tetra-, or pentachlorophenol or discarded unused formulation containing compounds derived from these chlorophenols. (This listing does not include formulations containing hexachlorophene synthesized from prepurified 2,4,5-trichlorophenol as the sole component.)(H)
F028Residues resulting from the incineration or thermal treatment of soil contaminated with EPA hazardous waste numbers F020, F021, F022, F023, F026 and F027.(T)
F032Wastewaters (except those that have not come into contact with process contaminants), process residuals, preservative drippage, and spent formulations from wood preserving processes generated at plants that currently use or have previously used chlorophenolic formulations (except potentially cross-contaminated wastes that have had the F032 waste code deleted in accordance with subdivision [f] of this section or potentially cross-contaminated wastes that are otherwise currently regulated as hazardous wastes [i.e., F034 or F035], and where the generator does not resume or initiate use of chlorophenolic formulations). This listing does not include K001 bottom sediment sludge from the treatment of wastewater from wood preserving processes that use creosote and/or pentachlorophenol.(T)
F034Wastewaters (except those that have not come into contact with process contaminants), process residuals, preservative drippage, and spent formulations from wood preserving processes generated at plants that use creosote formulations. This listing does not include K001 bottom sediment sludge from the treatment of wastewater from wood preserving processes that use creosote and/or pentachlorophenol.(T)
F035Wastewaters (except those that have not come into contact with process contaminants), process residuals, preservative drippage, and spent formulations from wood preserving processes generated at plants that use inorganic preservatives containing arsenic or chromium. This listing does not include K001 bottom sediment sludge from the treatment of wastewater frorn wood preserving processes that use creosote and/or pentachlorophenol.(T)
F037Petroleum refinery primary oil/water/solids separation sludge; any sludge generated from the gravitational separation of oil/ water/solids during the storage or treatment of process wastewaters and oily cooling wastewaters from petroleum refineries. Such sludges include, but are not limited to, those generated in: oil/water/solids separators; tanks and impoundments; ditches and other conveyances; sumps; and stormwater units receiving dry weather flow. Sludge generated in stormwater units that do not receive dry weather flow, sludges generated from non-contact once-through cooling waters segregated for treatment from other process or oily cooling waters, sludges generated in aggressive biological treatment units as defined in subparagraph (2)(ii) of this subdivision (including sludges generated in one or more additional units after wastewaters have been treated in aggressive biological treatment units) and K051 wastes are not included in this listing. This listing does include residuals generated from processing or recycling oil-bearing hazardous secondary materials excluded under section 371.1(e)(1)(xii) (a) of this Part, if those residuals are to be disposed of.(T)
F038Petroleum refinery secondary (emulsified) oil/water/solids separation sludge; any sludge and/or float generated from the physical and/or chemical separation of oil/water/solids in process wastewaters and oily cooling wastewaters from petroleum refineries. Such wastes include, but are not limited to, all sludges and floats generated in: induced air flotation (IAF) units, tanks and impoundments, and all sludges generated in DAF units. Sludges generated in stormwater units that do not receive dry weather flow, sludges generated from non-contact once-through cooling waters segregated for treatment from other process or oily cooling waters, sludges and floats generated in aggressive biological treatment units as defined in subparagraph (2)(ii) of this subdivision (including sludges and floats generated in one or more additional units after wastewaters have been treated in aggressive biological treatment units) and F037, K048, and K051 wastes are not included in this listing.(T)
F039Leachate (liquids that have percolated through land disposed wastes) resulting from the disposal of more than one restricted waste classified as hazardous under this section. (Leachate resulting from the disposal of one or more of the following EPA hazardous wastes and no other hazardous waste retains its EPA hazardous waste number(s): F020, F021, F022, F026, F027, and/or F028.)(T)

* (I,T) should be used to specify mixtures that are ignitable and contain toxic constituents.

(2) Listing specific definitions:
(i) For the purposes of the F037 and F038 listings, oil/water/solids is defined as oil and/or water and/or solids.
(ii)
(a) For the purposes of the F037 and F038 listings, aggressive biological treatment units are defined as units which employ one of the following four treatment methods: activated sludge; trickling filter; rotating biological contactor for the continuous accelerated biological oxidation of wastewaters; or high-rate aeration. High-rate aeration is a system of surface impoundments or tanks, in which intense mechanical aeration is used to completely mix the wastes, enhance biological activity, and:
(1) the units employ a minimum of six hp per million gallons of treatment volume; and
(2) either the hydraulic retention time of the unit is no longer than five days; or
(3) the hydraulic retention time is no longer than 30 days and the unit does not generate a sludge that is a hazardous waste by the toxicity characteristic.
(b) Generators and treatment, storage and disposal facilities have the burden of proving that their sludges are exempt from listing as F037 and F038 wastes under this definition. Generators and treatment, storage and disposal facilities must maintain, in their operating or other onsite records, documents and data sufficient to prove that:
(1) the unit is an aggressive biological treatment unit as defined in this subparagraph; and
(2) the sludges sought to be exempted from the definitions of F037 and/or F038 were actually generated in the aggressive biological treatment unit.
(iii)
(a) For the purposes of the F037 listing, sludges are considered to be generated at the moment of deposition in the unit, where deposition is defined as at least a temporary cessation of lateral particle movement.
(b) For the purposes of the F038 listing:
(1) sludges are considered to be generated at the moment of deposition in the unit, where deposition is defined as at least a temporary cessation of lateral particle movement; and
(2) floats are considered to be generated at the moment they are formed in the top of the unit.
(iv) For the purposes of the F019 listing, the following apply to wastewater treatment sludges from the manufacturing of motor vehicles using a zinc phosphating process.
(a) Motor vehicle manufacturing is defined to include the manufacture of automobiles and light trucks/utility vehicles (including light duty vans, pick-up trucks, minivans, and sport utility vehicles). Facilities must be engaged in manufacturing complete vehicles (body and chassis or unibody) or chassis only.
(b) Generators must maintain in their on-site records documentation and information sufficient to prove that the wastewater treatment sludges to be exempted from the F019 listing meet the conditions of the listing. These records must include: the volume of waste generated and disposed of offsite; documentation showing when the waste volumes were generated and sent offsite; the name and address of the receiving facility; and documentation confirming receipt of the waste by the receiving facility. Generators must maintain these records on-site for no less than three years. The retention period for the records is automatically extended during the course of any enforcement action or as requested by the department.
(c)Hazardous wastes from specific sources.
(1) The following solid wastes are listed hazardous waste from specific sources unless excluded under section 370.3(a) and (c) of this Title and listed in Appendix 24, infra:

Industry and
EPA hazardousHazard
waste numberHazardous wastecode
Wood preservation:
K001Bottom sediment sludge from the treatment of wastewaters from wood preserving processes that use creosote and/or pentachlorophenol.(T)
Inorganic pigments:
K002Wastewater treatment sludge from the production of chrome yellow and orange pigments.(T)
K003Wastewater treatment sludge from the production of molybdate orange pigments.(T)
K004Wastewater treatment sludge from the production of zinc yellow pigments.(T)
K005Wastewater treatment sludge from the production of chrome green pigments.(T)
K006Wastewater treatment sludge from the production of chrome oxide green pigments (anhydrous and hydrated).(T)
K007Wastewater treatment sludge from the production of iron blue pigments.(T)
K008Oven residue from the production of chrome oxide green pigments.(T)
Organic chemicals:
K009Distillation bottoms from the production of acetaldehyde from ethylene.(T)
K010Distillation side cuts from the production of acetaldehyde from ethylene.(T)
K011Bottom stream from the wastewater stripper in the production of acrylonitrile.(R,T)
K013Bottom stream from the acetonitrile column in the production of acrylonitrile.(R,T)
K014Bottoms from the acetonitrile purification column in the production of acrylonitrile.(T)
K015Still bottoms from the distillation of benzyl chloride.(T)
K016Heavy ends or distillation residues from the production of carbon tetrachloride.(T)
K017Heavy ends (still bottoms) from the purification column in the production of epichlorohydrin.(T)
K018Heavy ends from the fractionation column in ethyl chloride production.(T)
K019Heavy ends from the distillation of ethylene dichloride in ethylene dichloride production.(T)
K020Heavy ends from the distillation of vinyl chloride monomer production.(T)
K021Aqueous spent antimony catalyst waste from fluoromethanes production.(T)
K022Distillation bottom tars from the production of phenol/acetone from cumene.(T)
K023Distillation light ends from the production of phthalic anhydride from naphthalene.(T)
K024Distillation bottoms from the production of phthalic anhydride from naphthalene.(T)
K025Distillation bottoms from the production of nitrobenzene by the nitration of benzene.(T)
K026Stripping still tails from the production of methyl ethyl pyridines.(T)
K027Centrifuge and distillation residues from toluene diisocyanate production.(R,T)
K028Spent catalyst from the hydrochlorinator reactor in the production of 1,1,1-trichloethane.(T)
K029Waste from the product steam stripper in the production of 1,1,1-trichloroethane.(T)
K030Column bottoms or heavy ends from the combined production of trichloroethylene and perchloroethylene.(T)
K083Distillation bottoms from aniline production.(T)
K085Distillation or fractionation column bottoms from the production of chlorobenzenes.(T)
K093Distillation light ends from the production of phthalic anhydride from ortho-xylene.(T)
K094Distillation bottoms from the production of phthalic anhydride from ortho-xylene.(T)
K095Distillation bottoms from the production of 1,1,1-trichloroethane.(T)
K096Heavy ends from the heavy ends column from the production of 1,1,1-trichloroethane.(T)
K103Process residues from aniline extraction from the production of aniline.(T)
K104Combined wastewater streams generated from nitrobenzene/aniline production.(T)
K105Separated aqueous stream from the reactor product washing step in the production of chlorobenzene.(T)
K107Column bottoms from product separation from the production of 1,1-dimethylhydrazine (UDMH) from carboxylic acid hydrazides.(C,T)
K108Condensed column overheads from product separation and condensed reactor vent gases from the production of 1,1-dimethylhydrazine (UDMH) from carboxylic acid hydrazides.(I,T)
K109Spent filter cartridges from product purification from the production of 1,1-dimethylhydrazine (UDMH) from carboxylic acid hydrazides.(T)
K110Condensed column overheads from intermediate separation from the production of 1,1-dimethylhydrazine (UDMH) from carboxylic acid hydrazides.(T)
K111Product washwaters from the production of dinitrotoluene via nitration of toluene.(C,T)
K112Reaction by-product water from the drying column in the production of toluenediamine via hydrogenation of dinitrotoluene.(T)
K113Condensed liquid light ends from the purification of toluenediamine in the production of toluenediamine via hydrogenation of dinitrotoluene.(T)
K114Vicinals from the purification of toluenediamine in the production of toluenediamine via hydrogenation of dinitrotoluene.(T)
K115Heavy ends from the purification of toluenediamine in the production of toluenediamine via hydrogenation of dinitrotoluene.(T)
K116Organic condensate from the solvent recovery column in the production of toluene diisocyanate via phosgenation of toluenediamine.(T)
K117Wastewater from the reactor vent gas scrubber in the production of ethylene dibromide via bromination of ethene.(T)
K118Spent adsorbent solids from purification of ethylene dibromide in the production of ethylene dibromide via bromination of ethene.(T)
K136Still bottoms from the purification of ethylene dibromide in the production of ethylene dibromide via bromination of ethene.(T)
K149Distillation bottoms from the production of alpha- (or methyl-) chlorinated toluenes, ring-chlorinated toluenes, benzoyl chlorides, and compounds with mixtures of these functional groups. (This waste does not include still bottoms from the distillation of benzyl chloride.)(T)
K150Organic residuals, excluding spent carbon adsorbent, from the spent chlorine gas and hydrochloric acid recovery processes associated with the production of alpha- (or methyl-) chlorinated toluenes, ring-chlorinated toluenes, benzoyl chlorides, and compounds with mixtures of these functional groups.(T)
K151Wastewater treatment sludges, excluding neutralization and biological sludges, generated during the treatment of wastewaters from the production of alpha- (or methyl-) chlorinated toluenes, ring-chlorinated toluenes, benzoyl chlorides, and compounds with mixtures of these functional groups.(T)
K156Organic waste (including heavy ends, still bottoms, light ends, spent solvents, filtrates, and decantates) from the production of carbamates and carbamoyl oximes. (This listing does not apply to wastes generated from the manufacture of 3-iodo-2-propynyl n-butylcarbamate.)(T)
K157Wastewaters (including scrubber waters, condenser waters, washwaters, and separation waters) from the production of carbamates and carbamoyl oximes. (This listing does not apply to wastes generated from the manufacture of 3-iodo-2-propynyl n-butylcarbamate.)(T)
K158Bag house dusts and filter/separation solids form the production of carbamates and arbamoyl oximes. (This listing does not apply to wastes generated from the manufacture of 3-iodo-2-propynyl n-butylcarbamate.)(T)
K159Organics from the treatment of thiocarbamate wastes.(T)
K161Purification solids (including filtration, evaporation, and centrifugation solids), bag house dust and floor sweepings from the production of dithiocarbamate acids and their salts. (This listing does not include K125 and K126.)(R,T)
K174Wastewater treatment sludges from the production of ethylene dicloride or vinyl chloride monomer (including sludges that result from commingled ethylene dichloride or vinyl chloride monomer wastewater and other wastewater), unless the sludges meet the following conditions: (i) they are disposed of in a subtitle C or non-hazardous landfill licensed or permitted by the State or Federal government; (ii) they are not otherwise placed on the land prior to final disposal; and (iii) the generator maintains documentation demonstrating that the waste was either disposed of in an on-site landfill or consigned to a transporter or disposal facility that provided a written commitment to dispose of the waste in an off-site landfill. Respondents in any action brought to enforce the requirements of subtitle C must, upon a showing by the government that the respondent managed wastewater treatment sludges from the production of vinyl chloride monomer or ethylene dichloride, demonstrate that they meet the terms of the exclusion set forth above. In doing so, they must provide appropriate documentation (e.g., contracts between the generator and the landfill owner/operator, invoices documenting delivery of waste to landfill, etc.) that the terms of the exclusion were met.(T)
K175Wastewater treatment sludges from the production of vinyl chloride monomer using mercuric chloride catalyst in an acetylene-based process.(T)
K181Nonwastewaters from the production of dyes and/or pigments (including nonwastewaters commingled at the point of generation with nonwastewaters from other processes) that, at the point of generation, contain mass loadings of any of the constituents identified in paragraph (3) of this subdivision, that are equal to or greater than the corresponding paragraph (3) levels, as determined on a calendar year basis. These wastes will not be hazardous if the nonwastewaters are: (i) disposed in a landfill permitted under Part 360 of this Title or if out of state disposed in a 40 CFR subtitle D landfill unit subject to the design criteria in 40 CFR 258.40, as incorporated by reference in section 370.1(e) of this Title; (ii) disposed in a Part 373 landfill unit subject to either sections 373-2.14 or 373-3.14(j) of this Title or if out of state disposed in a 40 CFR subtitle C landfill unit subject to either 40 CFR 264.301 or 40 CFR 265.301, as incorporated by reference in section 370.1(e) of this Title; (iii) if out of state, disposed in other 40 CFR subtitle D landfill units that meet the design criteria in 40 CFR 258.40, 264.301, or 265.301 as incorporated by reference in section 370.1(e) of this Title; or (iv) treated in a combustion unit that is permitted under Part 373 or 40 CFR subtitle C, as incorporated by reference in section 370.1(e) of this Title, or an on-site combustion unit that is permitted under the Clean Air Act at 40 CFR parts 60, 61, or 63, as incorporated by reference by section 200.10 of this Title. For the purposes of this listing, dyes and/or pigments production is defined in subparagraph (2)(i) of this subdivision. Paragraph (4) of this subdivision describes the process for demonstrating that a facility's nonwastewaters are not K181. This listing does not apply to wastes that are otherwise identified as hazardous under section 371.3(b),(c), (d) and (e) of this Part and subdivisions (b), (c) and (d) of this section, at the point of generation. Also, the listing does not apply to wastes generated before any annual mass loading limit is met.(T)
Inorganic chemicals:
K071Brine purification muds from the mercury cell process in chlorine production, where separately prepurified brine is not used.(T)
K073Chlorinated hydrocarbon waste from the steps of the diaphragm cell process using graphite anodes in chlorine production.(T)
K106Wastewater treatment sludges from the mercury cell process in chlorine production.(T)
Pesticides:
K031By-product salts generated in the production of MSMA and cacodylic acid.(T)
K032Wastewater treatment sludge from the production of chlordane.(T)
K033Wastewater and scrub water from the chlorination of cyclopentadiene in the production of chlordane.(T)
K034Filter solids from the filtration of hexachloro-cyclopentadiene in the production of chlordane.(T)
K035Wastewater treatment sludges generated in the production of creosote.(T)
K036Still bottoms from toluene reclamation distillation in the production of disulfoton.(T)
K037Wastewater treatment sludges from the production of disulfoton.(T)
K038Wastewater from the washing and stripping of phorate production.(T)
K039Filter cake from the filtration of diethylphos-phorodithioic acid in the production of phorate.(T)
K040Wastewater treatment sludge from the production of phorate.(T)
K041Wastewater treatment sludge from the production of toxaphene.(T)
K042Heavy ends or distillation residues from the distillation of tetrachlorobenzene in the production 2,4,5-T.(T)
K0432,6-Dichlorophenol waste from the production of 2,4-D.(T)
K097Vacuum stripper discharge from the chlordane chlorinator in the production of chlordane.(T)
K098Untreated process wastewater from the production of toxaphene.(T)
K099Untreated wastewater from the production of 2,4-D.(T)
K123Process wastewater (including supernates, filtrates, and washwaters) from the production of ethylenebisdithiocarbamic acid and its salts.(T)
K124Reactor vent scrubber water from the production of ethylenebisdithiocarbamic acid and its salts.(C,T)
K125Filtration, evaporation, and centrifugation solids from the production of ethylenebisdithiocarbamic acid and its salts.(T)
K126Baghouse dust and floor sweepings in milling and packaging operations from the production or formulation of ethylenebisdithiocarbamic acid and its salts.(T)
K131Wastewater from the reactor and spent sulfuric acid from the acid dryer from the production of methyl bromide.(C,T)
K132Spent absorbent and wastewater separator solids from the production of methyl bromide.(T)
K176Baghouse filters from the production of antimony oxide, including filters from the production of intermediates (e.g., antimony metal or crude antimony oxide).(E)
K177Slag from the production of antimony oxide that is speculatively accumulated or disposed, including slag from the production of intermediates (e.g., antimony metal or crude antimony oxide).(T)
K178Residues from manufacturing and manufacturing-site storage of ferric chloride from acids formed during the production of titanium dioxide using the chloride-ilmenite process.(T)
Explosives:
K044Wastewater treatment sludges from the manufacturing and processing of explosives.(R)
K045Spent carbon from the treatment of wastewater containing explosives.(R)
K046Wastewater treatment sludges from the manufacturing, formulation and loading of lead-based initiating compounds.(T)
K047Pink/red water from TNT operations.(R)
Petroleum refining:
K048Dissolved air flotation (DAF) float from the petroleum refining industry.(T)
K049Slop oil emulsion solids from the petroleum refining industry.(T)
K050Heat exchanger bundle cleaning sludge from the petroleum refining industry.(T)
K051API separator sludge from the petroleum refining industry.(T)
K052Tank bottoms (leaded) from the petroleum refining industry.(T)
K169Crude oil storage tank sediment from petroleum refining operations.(T)
K170Clarified slurry oil tank sediment and/or in-line filter/separation solids from petroleum refining operation.(T)
K171Spent hydrotreating catalyst from petroleum refining operations, including guard beds used to desulfurize feeds to other catalytic reactors (this listing does not include inert support media).(I, T)
K172Spent hydrorefining catalyst from petroleum refining operations, including guard beds used to desulfurize feeds to other catalytic reactors (this listing does not include inert support media).(I, T)
Iron and steel:
K061Emission control dust/sludge from the primary production of steel in electric furnaces.(T)
K062Spent pickle liquor generated by steel finishing operations of facilities within the iron and steel industry (SIC codes 331 and 332).(C,T)
Primary aluminum:
K088Spent potliners from primary aluminum reduction.(T)
Secondary lead:
K069Emission control dust/sludge from secondary lead smelting, except sludge generated from secondary acid scrubber systems.(T)
K100Waste leaching solution from acid leaching of emission control dust/sludge from secondary lead smelting.(T)
Veterinary pharmaceuticals:
K084Wastewater treatment sludges generated during the production of veterinary pharmaceuticals from arsenic or organo-arsenic compounds.(T)
K101Distillation tar residues from the distillation of aniline-based compounds in the production of veterinary pharmaceuticals from arsenic or organo-arsenic compounds.(T)
K102Residue from the use of activated carbon for decolorization in the production of veterinary pharmaceuticals from arsenic or organo-arsenic compounds.(T)
Ink formation:
K086Solvent washes and sludges, caustic washes and sludges, or water washes and sludges from cleaning tubs and equipment used in the formulation of ink from pigments, driers, soaps, and stabilizers containing chromium and lead.(T)
Coking:
K060Ammonia still lime sludge from coking operations.(T)
K087Decanter tank tar sludge from coking operations.(T)
K141Process residues from the recovery of coal tar, including, but not limited to, collecting sump residues from the production of coke from coal or the recovery of coke by-products produced from coal. This listing does not include K087 (decanter tank tar sludges from coking operations).(T)
K142Tar storage tank residues from the production of coke from coal or from the recovery of coke by-products produced from coal.(T)
K143Process residues from the recovery of light oil, including, but not limited to, those generated in stills, decanters, and wash oil recovery units from the recovery of coke by-products produced from coal.(T)
K144Wastewater sump residues from light oil refining, including, but not limited to, intercepting or contamination sump sludges from the recovery of coke by-products produced from coal.(T)
K145Residues from naphthalene collection and recovery operations from the recovery of coke by-products produced from coal.(T)
K147Tar storage tank residues from coal tar refining.(T)
K148Residues from coal tar distillation, including but not limited to, still bottoms.(T)

(2) Listing specific definitions:
(i) For purposes of the K181 listing, dyes and/or pigments production is defined to include manufacture of the following product classes: dyes, pigments, or FDA certified colors that are classified as azo, triarylmethane, perylene or anthraquinone classes. Azo products include azo, monoazo, diazo, triazo, polyazo, azoic, benzidine, and pyrazolone products. Triarylmethane products include both triarylmethane and triaphenylmethane products. Wastes that are not generated at a dyes and/or pigments manufacturing site, such as wastes from the offsite use, formulation, and packaging of dyes and/or pigments, are not included in the K181 listing.
(3) K181 listing levels. Nonwastewaters containing constituents in amounts equal to or exceeding the following levels during any calendar year are subject to the K181 listing, unless the conditions in the K181 listing are met.

ConstituentChemical abstracts No.Mass levels (kg/yr)
Aniline62-53-39,300
o-Anisidine90-04-0110
4-Chloroaniline106-47-84,800
p-Cresidine120-71-8660
2,4-Dimethylaniline95-68-1100
1,2-Phenylenediamine95-54-5710
1,3-Phenylenediamine108-45-21,200

(4) Procedures for demonstrating that dyes and/or pigment nonwastewaters are not K181. The procedures described in subparagraphs (4)(i) through (4)(iii) and (4)(v) of this subdivision establish when nonwastewaters from the production of dyes/pigments would not be hazardous (these procedures apply to wastes that are not disposed in landfill units or treated in combustion units as specified in paragraph (1) of this subdivision). If the nonwastewaters are disposed in landfill units or treated in combustion units as described in paragraph (1) of this subdivision, then the nonwastewaters are not hazardous. In order to demonstrate that it is meeting the landfill disposal or combustion conditions contained in the K181 listing description, the generator must maintain documentation as described in subparagraph (4)(iv) of this subdivision.
(i) Determination based on no K181 constituents. Generators that have knowledge (e.g., knowledge of constituents in wastes based on prior sampling and analysis data and/or information about raw materials used, production processes used, and reaction and degradation products formed) that their wastes contain none of the K181 constituents (see paragraph [3] of this subdivision) can use their knowledge to determine that their waste is not K181. The generator must document the basis for all such determinations on an annual basis and keep each annual documentation for three years.
(ii) Determination for generated quantities of 1,000 MT/yr or less for wastes that contain K181 constituents. If the total annual quantity of dyes and/or pigment nonwastewaters generated is 1,000 metric tons or less, the generator can use knowledge of the wastes (e.g., knowledge of constituents in wastes based on prior analytical data and/or information about raw materials used, production processes used, and reaction and degradation products formed) to conclude that annual mass loadings for the K181 constituents are below the listing levels of paragraph (3) of this subdivision. To make this determination, the generator must:
(a) Each year document the basis for determining that the annual quantity of nonwastewaters expected to be generated will be less than 1,000 metric tons.
(b) Track the actual quantity of nonwastewaters generated from January 1 through December 31 of each year. If, at any time within the year, the actual waste quantity exceeds 1,000 metric tons, the generator must comply with the requirements of subparagraph (4)(iii) of this subdivision for the remainder of the year.
(c) Keep a running total of the K181 constituent mass loadings over the course of the calendar year.
(d) Keep the following records on site for the three most recent calendar years in which the hazardous waste determinations are made:
(1) The quantity of dyes and/or pigment nonwastewaters generated.
(2) The relevant process information used.
(3) The calculations performed to determine annual total mass loadings for each K181 constituent in the nonwastewaters during the year.
(iii) Determination for generated quantities greater than 1,000 MT/yr for wastes that contain K181 constituents. If the total annual quantity of dyes and/or pigment nonwastewaters generated is greater than 1,000 metric tons, the generator must perform all of the steps described in clauses ([athrough [k) of this subparagraph) in order to make a determination that its waste is not K181.
(a) Determine which K181 constituents (see paragraph [3] of this subdivision) are reasonably expected to be present in the wastes based on knowledge of the wastes (e.g., based on prior sampling and analysis data and/or information about raw materials used, production processes used, and reaction and degradation products formed).
(b) If 1,2-phenylenediamine is present in the wastes, the generator can use either knowledge or sampling and analysis procedures to determine the level of this constituent in the wastes. For determinations based on use of knowledge, the generator must comply with the procedures for using knowledge described in subparagraph (ii) of this paragraph and keep the records described in clause (ii)(d) of this paragraph. For determinations based on sampling and analysis, the generator must comply with the sampling and analysis and recordkeeping requirements described below in this subdivision.
(c) Develop a waste sampling and analysis plan (or modify an existing plan) to collect and analyze representative waste samples for K181 constituents reasonably expected to be present in the wastes. At a minimum, the plan must include:
(1) a discussion of the number of samples needed to characterize the wastes fully;
(2) the planned sample collection method to obtain representative waste samples;
(3) a discussion of how the sampling plan accounts for potential temporal and spatial variability of the wastes;
(4) a detailed description of the test methods to be used, including sample preparation, clean up (if necessary), and determinative methods.
(d) Collect and analyze samples in accordance with the waste sampling and analysis plan.
(1) The sampling and analysis must be unbiased, precise, and representative of the wastes.
(2) The analytical measurements must be sufficiently sensitive, accurate and precise to support any claim that the constituent mass loadings are below the listing levels of paragraph (3) of this subdivision.
(e) Record the analytical results.
(f) Record the waste quantity represented by the sampling and analysis results.
(g) Calculate constituent-specific mass loadings (product of concentrations and waste quantity).
(h) Keep a running total of the K181 constituent mass loadings over the course of the calendar year.
(i) Determine whether the mass of any of the K181 constituents listed in paragraph (3) of this subdivision generated between January 1 and December 31 of any year is below the K181 listing levels.
(j) Keep the following records on site for the three most recent calendar years in which the hazardous waste determinations are made:
(1) The sampling and analysis plan.The calculations performed to determine annual mass loadings.
(2) The sampling and analysis results (including QA/QC data).
(3) The quantity of dyes and/or pigment nonwastewaters generated.
(4) The calculations performed to determine annual mass loadings.
(k) Nonhazardous waste determinations must be conducted annually to verify that the wastes remain nonhazardous.
(1) The annual testing requirements are suspended after three consecutive successful annual demonstrations that the wastes are nonhazardous. The generator can then use knowledge of the wastes to support subsequent annual determinations.
(2) The annual testing requirements are reinstated if the manufacturing or waste treatment processes generating the wastes are significantly altered, resulting in an increase of the potential for the wastes to exceed the listing levels.
(3) If the annual testing requirements are suspended, the generator must keep records of the process knowledge information used to support a nonhazardous determination. If testing is reinstated, a description of the process change must be retained.
(iv) Recordkeeping for the landfill disposal and combustion exemptions. For the purposes of meeting the landfill disposal and combustion condition set out in the K181 listing description, the generator must maintain on site for three years documentation demonstrating that each shipment of waste was received by a landfill unit that is subject to or meets the landfill design standards set out in the listing description, or was treated in combustion units as specified in the listing description.
(v) Waste holding and handling. During the interim period, from the point of generation to completion of the hazardous waste determination, the generator is responsible for storing the wastes appropriately. If the wastes are determined to be hazardous and the generator has not complied with the requirements of Parts 370 through 374-4 and Part 376 of this Title during the interim period, the generator is in violation and could be subject to an enforcement action for improper management.
(d)Discarded commercial chemical products, off-specification species, container residues, and spill residues thereof. The following materials or items are hazardous wastes if and when they are discarded or intended to be discarded as described in section 371.1(c)(2)(i) of this Part, when they are mixed with waste oil or used oil or other material and applied to the land for dust suppression or road treatment, when they are otherwise applied to the land in lieu of their original intended use or when they are contained in products that are applied to the land in lieu of their original intended use, or when, in lieu of their original intended use, they are produced for use as (or as a component of) a fuel, distributed for use as a fuel, or burned as a fuel:
(1) any commercial chemical product, or manufacturing chemical intermediate having the generic name listed in paragraph (5) or (6) of this subdivision;
(2) any off-specification commercial chemical product or manufacturing chemical intermediate which, if it met specifications, would have the generic name listed in paragraph (5) or (6) of this subdivision;
(3) any residue remaining in a container or inner liner removed from a container that has been used to hold any commercial chemical product or manufacturing chemical intermediate having the generic names listed in paragraph (5) or (6) of this subdivision, or any residue remaining in a container or inner liner removed from a container that has been used to hold any off-specification chemical product or manufacturing chemical intermediate, which if it met specifications, would have the generic name listed in paragraph (5) or (6) of this subdivision, unless the container is empty as defined in section 371.1(h)(2) of this Part.

Note:

Unless the residue is being beneficially used or reused, or legitimately recycled or reclaimed, or being accumulated, stored, transported or treated prior to such use, reuse, recycling or reclamation, EPA and the department consider the residue to be intended for discard, and thus, a hazardous waste. An example of a legitimate reuse of the residue would be where the residue remains in the container and the container is used to hold the same commercial chemical product or manufacturing chemical intermediate it previously held. An example of the discard of the residue would be where the drum is sent to a drum reconditioner who reconditions the drum but discards the residues. All waste resulting from the rinsing or cleansing of the container or inner liner, by a nonaqueous solvent, is a hazardous waste. All waste resulting from the aqueous rinsing or cleansing of the container or inner liner is a hazardous waste unless exempt pursuant to section 371.1(d)(1)(ii) (d)(4).

(4) any residue or contaminated soil, water or other debris resulting from the cleanup of a spill into or on any land or water of any commercial chemical product or manufacturing chemical intermediate having the generic name listed in paragraph (5) or (6) of this subdivision, or any residue or contaminated soil, water or other debris resulting from the cleanup of a spill, into or on any land or water, of any off-specification chemical product or manufacturing chemical intermediate which, if it met specifications, would have the generic name listed in paragraph (5) or (6) of this subdivision.

Note:

The phrase "commercial chemical product or manufacturing chemical intermediate having the generic name listed in. . ." refers to a chemical substance which is manufactured or formulated for commercial or manufacturing use which consists of the commercially pure grade of the chemical, any technical grades of the chemical that are produced or marketed, and all formulations in which the chemical is the sole active ingredient. It does not refer to a material, such as a manufacturing process waste, that contains any of the substances listed in paragraph (5) or (6). Where a manufacturing process waste is deemed to be a hazardous waste because it contains a substance listed in paragraph (5) or (6), such waste will be listed in either subdivision (b) or (c) of this section, or will be identified as a hazardous waste by the characteristics set forth in section 371.3 of this Part.

(5) Acute hazardous waste. The commercial chemical products, manufacturing chemical intermediates or off-specification commercial chemical products or manufacturing chemical intermediates referred to in paragraphs (1) through (4) of this subdivision, are identified as acute hazardous wastes (H) and are subject to the small quantity exclusion defined in section 371.1(f)(5) of this Part.

Note:

For the convenience of the regulated community the primary hazardous properties of the materials have been indicated by the letters T [Toxicity], and R [Reactivity]. Absence of a letter indicates that the compound only is listed for acute toxicity.

These wastes and their corresponding EPA hazardous waste numbers are:

EPAChemicalSubstance
hazardousabstracts No.
waste No.
P023107-20-0Acetaldehyde, chloro-
P002591-08-2Acetamide, N-(aminothioxomethyl)-
P057640-19-7Acetamide, 2-fluoro-
P05862-74-8Acetic acid, fluoro-, sodium salt
P002591-08-21-Acetyl-2-thiourea
P003107-02-8Acrolein
P070116-06-3Aldicarb
P2031646-88-4Aldicarb sulfone
P004309-00-2Aldrin
P005107-18-6Allyl alcohol
P00620859-73-8Aluminum phosphide (R,T)
P0072763-96-45-(Aminomethyl)-3-isoxazolol
P008504-24-54-Aminopyridine
P009131-74-8Ammonium picrate (R)
P1197803-55-6Ammonium vanadate
P099506-61-6Argentate (1-), bis (cyano-C)-, potassium
P0107778-39-4Arsenic acid H3AsO4
P0121327-53-3Arsenic oxide As2 O3
P0111303-28-2Arsenic oxide As2O5
P0111303-28-2Arsenic pentoxide
P0121327-53-3Arsenic trioxide
P038692-42-2Arsine, diethyl-
P036696-28-6Arsonous dichloride, phenyl-
P054151-56-4Aziridine
P06775-55-8Aziridine, 2-methyl-
P013542-62-1Barium cyanide
P024106-47-8Benzenamine, 4-chloro-
P077100-01-6Benzenamine, 4-nitro-
P028100-44-7Benzene, (chloromethyl)-
P04251-43-41,2-Benzenediol, 4-[1-hydroxy-2-(methylamino) ethyl]-, (R)-
P046122-09-8Benzeneethanamine, alpha, alpha-dimethyl-
P014108-98-5Benzenethiol
P1271563-66-27-Benzofuranol, 2,3-dihydro-2,2-dimethyl-, methylcarbamate
P18857-64-7Benzoic acid, 2-hydroxy-, compd. w/(3aS-cis)-1,2,3a, 8,8a- hexahydro-1,3a,8-trimethylpyrrolo[2,3-b]indol-5-yl methycarbamate ester (1:1)
P001181-81-22H-1-Benzopyran-2-one, 4-hydroxy-3- (3-oxo-1-phenylbutyl)-1, & salts, when present at concentrations greater than 0.3 percent
P028100-44-7Benzyl chloride
P0157440-41-7Beryllium powder
P017598-31-2Bromoacetone
P018357-57-3Brucine
P04539196-18-42-Butanone, 3,3-dimethyl- 1-(methylthio)-, O-[(methylamino) carbonyl] oxime
P021592-01-8Calcium cyanide
P021592-01-8Calcium cyanide Ca(CN)2
P18955285-14-8Carbamic acid, [(dibutylamino)-thio]methyl-, 2, 3-dihydro-2,2-dimethyl-7-benzofuranyl ester
P191644-64-4Carbamic acid, dimethyl-, 1-[(dimethyl- amino)carbonyl]-5-methyl-1H-pyrazol-3-yl ester
P192119-38-0Carbamic acid, dimethyl-, 3-methyl-1(1-methylethyl)-1H-pyrazol-5yl ester
P1901129-41-5Carbamic acid, methyl-, 3-methylphenyl ester
P1271563-66-2Carbofuran
P02275-15-0Carbon disulfide
P09575-44-5Carbonic dichloride
P18955285-14-8Carbosulfan
P023107-20-0Chloroacetaldehyde
P024106-47-8p-Chloroaniline
P0265344-82-11-(o-Chlorophenyl)thiourea
P027542-76-73-Chloropropionitrile
P029544-92-3Copper cyanide
P029544-92-3Copper cyanide Cu(CN)
P20264-00-6m-Comenyl methylcarbamate
P030Cyanides (soluble cyanide salts), not otherwise specified
P031460-19-5Cyanogen
P033506-77-4Cyanogen chloride
P033506-77-4Cyanogen chloride (CN)Cl
P034131-89-52-Cyclohexyl-4, 6-dinitrophenol
P016542-88-1Dichloromethyl ether
P036696-28-6Dichlorophenylarsine
P03760-57-1Dieldrin
P038692-42-2Diethylarsine
P041311-45-5Diethyl-p-nitrophenyl phosphate
P040297-97-2O,O-Diethyl O-pyrazinyl phosphorothioate
P04355-91-4Diisopropylfluorophosphate (DFP)
P004309-00-21,4,5,8-Dimethanonaphthalene, 1,2,3,4,10,10- hexa- chloro-1,4,4a,5,8,8a,- hexahydro-, (1alpha, 4alpha, 4abeta, 5alpha, 8alpha, 8abeta) -
P060465-73-61,4,5,8- Dimethanonaphthalene, 1,2,3,4,10, 10-hexa-chloro- 1,4,4a,5,8,8a- hexahydro-, (1alpha, 4alpha, 4abeta, 5beta, 8beta, 8abeta) -
P03760-57-12,7:3,6-Dimethanonaphth[2,3-b]oxirene 3,4,5,6,9,9- hexachloro- 1a,2,2a,3,6,6a,7,7a-octahydro-, (1-a-alpha, 2beta, 2aalpha, 3beta, 6beta, 6aalpha, 7beta, 7aalpha) -
P051172-20-82,7:3,6-Dimethanonaphth [2,3-b]oxirene, 3,4,5,6,9,9-hexachloro-1a,2,2a,3,6,6a,7,7a-octahydro-, (1aalpha, 2beta, 2abeta, 3alpha, 6alpha, 6abeta, 7beta, 7aalpha)-, & metabolites
P04460-51-5Dimethoate
P046122-09-8alpha,alpha-Dimethylphenethylamine
P191644-64-4Dimetilan
P0471534-52-14,6-Dinitro-o-cresol, & salts
P04851-28-52,4-Dinitrophenol
P02088-85-7Dinoseb
P085152-16-9Diphosphoramide, octamethyl-
P111107-49-3Diphosphoric acid, tetraethyl ester
P039298-04-4Disulfoton
P049541-53-7Dithiobiuret
P18526419-73-81,3-Dithiolane-2-carboxaldehyde, 2,4-dimethyl-,0-[(methylamino)-carbonyl]oxime
P050115-29-7Endosulfan
P088145-73-3Endothall
P05172-20-8Endrin
P05172-20-8Endrin, & metabolites
P04251-43-4Epinephrine
P031460-19-5Ethanedinitrile
P19423135-22-0Ethanimidothioic acid, 2-(dimethylamino)-N-[[(methylamino) carbonyl]oxy]-2-oxo-, methyl ester
P06616752-77-5Ethanimidothioic acid, N-[[(methylamino) carbonyl]oxy]-, methyl ester
P101107-12-0Ethyl cyanide
P054151-56-4Ethyleneimine
P09752-85-7Famphur
P0567782-41-4Fluorine
P057640-19-7Fluoroacetamide
P05862-74-8Fluoroacetic acid, sodium salt
P19823422-53-9Formetanate hydrochloride
P19717702-57-7Formparanate
P065628-86-4Fulminic acid, mercury (2+) salt (R,T)
P05976-44-8Heptachlor
P062757-58-4Hexaethyl tetraphosphate
P11679-19-6Hydrazinecarbothioamide
P06860-34-4Hydrazine, methyl-
P06374-90-8Hydrocyanic acid
P06374-90-8Hydrogen cyanide
P0967803-51-2Hydrogen phosphide
P060465-73-6Isodrin
P192119-38-0Isolan
P20264-00-63-Isopropylphenyl N-methylcarbamate
P0072763-96-43(2H)-Isoxazolone, 5-(aminomethyl)-
P19615339-3603Manganese, bis(dimethylcarbamodithioato-S,S')-
P19615339-36-3Manganese dimethyldithiocarbamate
P09262-38-4Mercury, (acetato-O)phenyl-
P065628-86-4Mercury fulminate (R,T)
P198233422-53-9Methanimidamide, N, N-dimethyl-N'-[3-[[(methylamino)-carbonyl]oxy]phenyl]-, monohydrochloride
P19717702-57-7Methanimidamide, N, N-dimethyl-N'-[2-methyl-4[(methylamino)carbonyl]oxy]phenyl]-
P08262-75-9Methanamine, N-methyl-N-nitroso-
P064624-83-9Methane, isocyanato-
P016542-88-1Methane, oxybis[chloro-
P112509-14-8Methane, tetranitro-(R)
P11875-70-7Methanethiol, trichloro-
P050115-29-76,9-Methano-2,4, 3-benzodioxathiepin, 6,7,8,9,10,10- hexachloro-1,5,5a,6,9,9a-hexahydro-, 3-oxide
P05976-44-84, 7-Methano-lH-indene, 1,4,5,6,7,8,8-heptachloro- 3a,4,7,7a-tetrahydro-
P1992032-65-7Methiocarb
P06616752-77-5Methomyl
P06860-34-4Methyl hydrazine
P064624-83-9Methyl isocyanate
P06975-86-52-Methyllactonitrile
P071298-00-0Methyl parathion
P1901129-41-5Metolcarb
P128315-18-4Mexacarbate
P07286-88-4alpha-Naphthylthiourea
P07313463-39-3Nickel carbonyl
P07313463-39-3Nickel carbonyl Ni(CO)4, (T-4)-
P074557-19-7Nickel cyanide
P074557-19-7Nickel cyanide Ni(CN)2
P075154-11-5Nicotine, & salts
P07610102-43-9Nitric oxide
P077100-01-6p-Nitroaniline
P07810102-44-0Nitrogen dioxide
P07610102-43-9Nitrogen oxide NO
P07810102-44-0Nitrogen oxide NO2
P08155-63-0Nitroglycerine (R)
P08262-75-9N-Nitrosodimethylamine
P0844549-40-0N-Nitrosomethylvinylamine
P085152-16-9Octamethylpyrophosphoramide
P08720816-12-0Osmium oxide OsO4, (T-4)-
P08720816-12-0Osmium tetroxide
P088145-73-37-Oxabicyclo[2.2.l]heptane-2, 3-dicarboxylic acid
P19423135-22-0Oxamyl
P08956-38-2Parathion
P034131-89-5Phenol, 2-cyclohexyl-4, 6-dinitro-
P128315-18-4Phenol, 4-(dimethylamino)-3,5-dimethyl-,methylcarbamate (ester)
P1992032-65-7Phenol,(3,5-dimethyl-4-(methylthio)-, methylcarbamate
P20264-00-6Phenol,3-(1-methylethyl)-,methyl carbamate
P2012631-37-0Phenol, 3-methyl-5-(1-methylethyl)-,methyl carbamate
P04851-28-5Phenol, 2,4-dinitro-
P0471534-52-1Phenol, 2-methyl-4,6-dinitro-, & salts
P02088-85-7Phenol, 2-(1-methylpropyl)-4, 6-dinitro-
P009131-74-8Phenol, 2,4,6-trinitro-, ammonium salt (R)
P09262-38-4Phenylmercury acetate
P093103-85-5Phenylthiourea
P094298-02-2Phorate
P09575-44-5Phosgene
P0967803-51-2Phosphine
P041311-45-5Phosphoric acid, diethyl 4-nitrophenyl ester
P039298-04-4Phosphorodithioic acid O,O-diethyl S-[2-(ethylthio)ethyl] ester
P094298-02-2Phosphorodithioic acid, O,O-diethyl S-[(ethylthio) methyl] ester
P04460-51-5Phosphorodithioic acid, O,O-dimethyl S-[2-(methylamino) -2-oxoethyl] ester
P04355-91-4Phosphorofluoridic acid, bis(1-methylethyl) ester
P08956-38-2Phosphorothioic acid, O,O-diethyl O-(4-nitrophenyl) ester
P040297-97-2Phosphorothioic acid, O,O-diethyl O-pyrazinyl ester
P09752-85-7Phosphorothioic acid, O-[4-[(dimethylamino) sulfonyl] phenyl] O,O-dimethyl ester
P071298-00-0Phosphorothioic acid, O,O,-dimethyl O-(4-nitrophenyl) ester
P20457-47-6Physostigmine
P18857-64-7Physostigimine salicylate
P11078-00-2Plumbane, tetraethyl-
P098151-50-8Potassium cyanide
P098151-50-8Potassium cyanide K(CN)
P099506-61-6Potassium silver cyanide
P2012631-37-0Promecarb
P070116-06-3Propanal, 2-methyl-2- (methylthio)-, O- [(methylamino)carbonyl]oxime
P2031646-88-4Propanal, 2-methyl-2-(methyl-sulfonyl)-, 0-[(methylamino)carbonyl] oxime
P101107-12-0Propanenitrile
P027542-76-7Propanenitrile, 3-chloro-
P06975-86-5Propanenitrile, 2-hydroxy-2-methyl-
P08155-63-01,2,3-Propanetriol, trinitrate (R)
P017598-31-22-Propanone, 1-bromo-
P102107-19-7Propargyl alcohol
P003107-02-82-Propenal
P005107-18-62-Propen-1-ol
P06775-55-81,2-Propylenimine
P102107-19-72-Propyn-1-ol
P008504-24-54-Pyridinamine
P075154-11-5Pyridine, 3-(1-methyl- 2-pyrrolidinyl)-, (S)-, & salts
P20457-47-6Pyrrolo[2,3-b]indol-5-ol, 1,2,3,3a,8,8a-hexahydro-1,3a, 8-trimethyl-, methylcarbamate (ester), (3aS-cis)-
P11412039-52-0Selenious acid, dithallium(1 +) salt
P103630-10-4Selenourea
P104506-64-9Silver cyanide
P104506-64-9Silver cyanide Ag(CN)
P10526628-22-8Sodium azide
P106143-33-9Sodium cyanide
P106143-33-9Sodium cyanide Na(CN)
P108157-24-9Strychnidin-10-one, & salts
P018357-57-3Strychnidin-10-one, 2,3-dimethoxy-
P108157-24-9Strychnine, & salts
P1157446-18-6Sulfuric acid, dithallium(1 +) salt
P1093689-24-5Tetraethyldithio pyrophosphate
P11078-00-2Tetraethyl lead
P111107-49-3Tetraethyl pyrophosphate
P112509-14-8Tetranitromethane (R)
P062757-58-4Tetraphosphoric acid, hexaethyl ester
P1131314-32-5Thallic oxide
P1131314-32-5Thallium oxide Tl2O3
P11412039-52-0Thallium(I) selenite
P1157446-18-6Thallium(I) sulfate
P1093689-24-5Thiodiphosphoric acid, tetraethyl ester
P04539196-18-4Thiofanox
P049541-53-7Thioimidodicarbonic diamide [(H2N)C(S)] 2NH
P014108-98-5Thiophenol
P11679-19-6Thiosemicarbazide
P0265344-82-1Thiourea, (2-chlorophenyl)-
P07286-88-4Thiourea, 1-naphthalenyl-
P093103-85-5Thiourea, phenyl-
P18526419-73-8Tirpate
P1238001-35-2Toxaphene
P11875-70-7Trichloromethanethiol
P1197803-55-6Vanadic acid, ammonium salt
P1201314-62-1Vanadium oxide V2O5
P1201314-62-1Vanadium pentoxide
P0844549-40-0Vinylamine, N-methyl-N-nitroso-
P001181-81-2Warfarin, & salts, when present at concentrations greater than 0.3 percent
P121557-21-1Zinc cyanide
P121557-21-1Zinc cyanide Zn(CN)2
P205137-30-4Zinc, bis(dimethylcarbamodithioato-S,S')-
P1221314-84-7Zinc phosphide Zn3P2, when present at concentrations greater than 10 percent (R,T)
P205137-30-4Ziram

____ 1CAS number given for parent compound only.

(6) The commercial chemical products, manufacturing chemical intermediates, or off- specification commercial chemical products referred to in paragraphs (1) through (4) of this subdivision, are identified as toxic waste (T) unless otherwise designated and are subject to the small quantity generator exclusion defined in section 371.1(f)(1) and (7) of this Part. (Note: For the convenience of the regulated community, the primary hazardous properties of these materials have been indicated by the letters T [Toxicity], R [Reactivity], I [Ignitability] and C [Corrosivity]. Absence of a letter indicates that the compound is only listed for toxicity. These wastes and their corresponding EPA hazardous waste numbers are:

EPAChemicalSubstance
hazardousabstracts No.
waste No.
U39430558-43-1A2213
U00175-07-0Acetaldehyde (I)
U03475-87-6Acetaldehyde, trichloro-
U18762-44-2Acetamide, N-(4-ethoxyphenyl)-
U00553-96-3Acetamide, N-9H-fluoren-2-yl-
U240194-75-7Acetic acid, (2,4-dichlorophenoxy)-, salts & esters
U112141-78-6Acetic acid ethyl ester (I)
U144301-04-2Acetic acid, lead(2+) salt
U214563-68-8Acetic acid, thallium(1+) salt
See F02793-76-5Acetic acid, (2,4,5-trichlorophenoxy)-
U00267-64-1Acetone (I)
U00375-05-8Acetonitrile (I,T)
U00498-86-2Acetophenone
U00553-96-32-Acetylaminofluorene
U00675-36-5Acetyl chloride (C,R,T)
U00779-06-1Acrylamide
U00879-10-7Acrylic acid (I)
U009107-13-1Acrylonitrile
U01161-82-5Amitrole
U01262-53-3Aniline (I,T)
U13675-60-5Arsinic acid, dimethyl-
U014492-80-8Auramine
U015115-02-6Azaserine
U01050-07-7Azirino [2"',3"': 3,4]pyrrolo[1,2-a]indole-4,7-dione, 6-amino- 8-[[(aminocarbonyl) oxy] methyl] -1,1a,2,8a,8b-hexahydro- 8a- methoxy-5-methyl-, [1aS- (1aalpha, 8beta, 8aalpha,8balpha)]-
U280101-27-9Barban
U27822781-23-3Bemdocarb
U36422961-82-6Bendiocarb phenol
U27117804-35-2Benomyl
U15756-49-5Benz [j] aceanthrylene, 1,2-dihydro-3-methyl-
U016225-51-4Benz[c]acridine
U01798-87-3Benzal chloride
U19223950-58-5Benzamide, 3, 5-dichloro-N- (1,1-dimethyl-2-propynyl) -
U01856-55-3Benz[a]anthracene
U09457-97-6Benz[a]anthracene, 7,12-dimethyl-
U01262-53-3Benzenamine (I,T)
U014492-80-8Benzenamine, 4,4"' -carbonimidoylbis[N,N-dimethyl-
U0493165-93-3Benzenamine, 4-chloro-2-methyl-, hydrochloride
U09360-11-7Benzenamine, N,N-dimethyl-4- (phenylazo)-
U32895-53-4Benzenamine, 2-methyl-
U353106-49-0Benzenamine, 4-methyl-
U158101-14-4Benzenamine, 4,4"' -methylenebis [2-chloro-
U222636-21-5Benzenamine, 2-methyl-, hydrochloride
U18199-55-8Benzenamine, 2-methyl-5-nitro-
U01971-43-2Benzene (I,T)
U038510-15-6Benzeneacetic acid, 4-chloro-alpha-(4-chlorophenyl)-alpha- hydroxy-, ethyl ester
U030101-55-3Benzene, 1-bromo-4-phenoxy
U035305-03-3Benzenebutanoic acid, 4-[bis (2- chloroethyl) amino] -
U037108-90-7Benzene, chloro-
U22125376-45-8Benzenediamine, ar-methyl-
U028117-81-71,2-Benzenedicarboxylic acid, bis(2-ethylhexyl) ester
U06984-74-21,2-Benzenedicarboxylic acid, dibutyl ester
U08884-66-21,2-Benzenedicarboxylic acid, diethyl ester
U102131-11-31,2-Benzenedicarboxylic acid, dimethyl ester
U107117-84-01,2-Benzenedicarboxylic acid, dioctyl ester
U07095-50-1Benzene, 1,2-dichloro-
U071541-73-1Benzene, 1,3-dichloro-
U072106-46-7Benzene, 1,4-dichloro-
U06072-54-8Benzene, 1,1"'-(2,2-dichloroethylidene) bis[4-chloro-
U01798-87-3Benzene, (dichloromethyl)-
U22326471-62-5Benzene, 1, 3-diisocyanatomethyl- (R, T)
U2391330-20-7Benzene, dimethyl-(I)
U201108-46-31,3-Benzenediol
U127118-74-1Benzene, hexachloro-
U056110-82-7Benzene, hexahydro- (I)
U220108-88-3Benzene, methyl-
U105121-14-2Benzene, 1-methyl-2,4-dinitro-
U106606-20-2Benzene, 2-methyl-1,3-dinitro-
U05598-82-8Benzene, (1-methylethyl)- (I)
U16998-95-3Benzene, nitro-
U183608-93-5Benzene, pentachloro-
U18582-68-8Benzene, pentachloronitro-
U02098-09-9Benzenesulfonic acid chloride (C,R)
U02098-09-9Benzenesulfonyl chloride (C,R)
U20795-94-3Benzene, 1,2,4,5-tetrachloro-
U06150-29-3Benzene, 1,1"'-(2,2,2-trichloroethylidene) bis[4-chloro-
U24772-43-5Benzene, 1,1,-(2,2,2-trichloroethylidene) bis[4- methoxy-
U02398-07-7Benzene, (trichloromethyl)-
U23499-35-4Benzene, 1,3,5-trinitro-
U02192-87-5Benzidine
U20281-07-21,2-Benzisothiazol- 3(2H)-one, 1,1-dioxide, & salts
U20394-59-71, 3-Benzodioxole, 5-(2-propenyl)-
U141120-58-11, 3-Benzodioxole, 5-(1-propenyl)-
U09094-58-61,3-Benzodioxole, 5-propyl-
U27822781-23-31,3-Benzodioxol-4-ol, 2,2-dimethyl-, methyl carbamate
U36422961-82-61,3-Benzodioxol-4-ol, 2-2-dimethyl-
U3671563-38-87-Benzofuranol, 2,3-dihydro-2,2-dimethyl-
U064189-55-9Benzo[rst]pentaphene
U248181-81-22H-1-Benzopyran-2-one, 4-hydroxy-3- (3-oxo-1- phenyl- butyl)-, & salts, when present at concentrations of 0.3 percent or less
U02250-32-8Benzo[a]pyrene
U197106-51-4p-Benzoquinone
U02398-07-7Benzotrichloride (C,R,T)
U0851464-53-52,2"'-Bioxirane
U02192-87-5[1,1"'-Biphenyl] -4,4"'-diamine
U07391-94-1[1,1"'-Biphenyl]-4,4"'-diamine, 3,3"'-dichloro-
U091119-90-4[1,1"'-Biphenyl]-4,4"'-diamine, 3,3"'-dimethoxy-
U095119-93-7[1,1"'-Biphenyl]-4,4"'-diamine, 3,3"'-dimethyl-
U22575-25-2Bromoform
U030101-55-34-Bromophenyl phenyl ether
U12887-68-31, 3-Butadiene, 1,1,2,3,4,4-hexachloro-
U172924-16-31-Butanamine, N-butyl-N-nitroso-
U03171-36-31-Butanol (I)
U15978-93-32-Butanone (I,T)
U1601338-23-42-Butanone, peroxide (R,T)
U0534170-30-32-Butenal
U074764-41-02-Butene, 1,4-dichloro- (I,T)
U143303-34-42-Butenoic acid, 2-methyl-,7-[[2,3-dihydroxy-2-(1-methoxyethyl) - 3-methyl-1-oxobutoxy] methyl] - 2,3,5,7a-tetrahydro-1H- pyrrolizin-1-yl ester, [1S- [1alpha(Z), 7(2S*,3R*),7aalpha]]-
U03171-36-3n-Butyl alcohol (I)
U13675-60-5Cacodylic acid
U03213765-19-0Calcium chromate
U23851-79-6Carbamic acid, ethyl ester
U37210605-21-7Carbamic acid, 1H-benzimidazol-2-yl,methyl ester
U27117804-35-2Carbamic acid, [1-[(butylamino)carbonyl]-1H- benzimidazol-2-yl]-,methyl ester
U280101-27-9Carbamic acid, (3-chlorophenyl)-,4-chloro-2-butynyl ester
U40923564-05-8Carbamic acid, [1,2-phenylenebis (iminocarbonothioyl)]bis-, dimethyl ester
U373122-42-9Carbamic acid, phenyl-, 1-methylethyl ester
U178615-53-2Carbamic acid, methylnitroso-, ethyl ester
U09779-44-7Carbamic chloride, dimethyl-
U114111-54-6Carbamodithioic acid, 1,2-ethanediylbis-, salts & esters
U0622303-16-4Carbamothioic acid, bis(1-methylethyl)-, S-(2,3- dichloro-2-propenyl) ester
U3892303-17-5Carbamothioic acid, bis(1-methylethyl-,, S(2,3,3-trichloro-2-propenyl) ester
U38752888-80-9Carbamothioic acid, dipropyl-, S- (phenylmethyl) ester
U27963-25-2Carbaryl
U37210605-21-7Carbendazim
U3671563-38-8Carbofuran phenol
U2156533-73-9Carbonic acid, dithallium(1+) salt
U033353-50-4Carbonic difluoride
U15679-22-1Carbonochloridic acid, methyl ester (I,T)
U033353-50-4Carbon oxyfluoride (R,T)
U21156-23-5Carbon tetrachloride
U03475-87-6Chloral
U035305-03-3Chlorambucil
U03657-74-9Chlordane, alpha & gamma isomers
U026494-03-1Chlornaphazin
U037108-90-7Chlorobenzene
U038510-15-6Chlorobenzilate
U03959-50-7p-Chloro-m-cresol
U042110-75-82-Chloroethyl vinyl ether
U04467-66-3Chloroform
U046107-30-2Chloromethyl methyl ether
U04791-58-7beta-Chloronaphthalene
U04895-57-8o-Chlorophenol
U0493165-93-34-Chloro-o-toluidine, hydrochloride
U03213765-19-0Chromic acid H2CrO4, calcium salt
U050218-01-9Chrysene
U051Creosote
U0521319-77-3Cresol (Cresylic acid)
U0534170-30-3Crotonaldehyde
U05598-82-8Cumene (I)
U246506-68-3Cyanogen bromide (CN)Br
U197106-51-42, 5-Cyclohexadiene- 1,4-dione
U056110-82-7Cyclohexane (I)
U12958-89-9Cyclohexane, 1,2,3,4,5,6-hexachloro-, (1alpha, 2alpha, 3beta, 4alpha, 5alpha, 6beta) -
U057108-94-1Cyclohexanone (I)
U13077-47-41, 3-Cyclopentadiene, 1,2,3,4,5,5-hexachloro-
U05850-18-0Cyclophosphamide
U240194-75-72,4-D, salts & esters
U05920830-81-3Daunomycin
U06072-54-8DDD
U06150-29-3DDT
U0622303-16-4Diallate
U06353-70-3Dibenz[a,h]anthracene
U064189-55-9Dibenzo[a,i]pyrene
U06696-12-81,2-Dibromo- 3-chloropropane
U06984-74-2Dibutyl phthalate
U07095-50-1o-Dichlorobenzene
U071541-73-1m-Dichlorobenzene
U072106-46-7p-Dichlorobenzene
U07391-94-13,3"'-Dichlorobenzidine
U074764-41-01,4-Dichloro-2-butene (I,T)
U07575-71-8Dichlorodifluoromethane
U07875-35-41,1-Dichloroethylene
U079156-60-51,2-Dichloroethylene
U025111-44-4Dichloroethyl ether
U027108-60-1Dichloroisopropyl ether
U024111-91-1Dichloromethoxy ethane
U081120-83-22,4-Dichlorophenol
U08287-65-02,6-Dichlorophenol
U084542-75-61,3-Dichloropropene
U0851464-53-51,2:3,4-Diepoxybutane (I, T)
U3955952-26-1Diethylene glycol, dicarbamate
U108123-91-11,4-Diethyleneoxide
U028117-81-7Diethylhexyl phthalate
U0861615-80-1N,N"'-Diethylhydrazine
U0873288-58-2O,O-Diethyl S-methyl dithiophosphate
U08884-66-2Diethyl phthalate
U08956-53-1Diethylstilbesterol
U09094-58-6Dihydrosafrole
U091119-90-43,3"'-Dimethoxybenzidine
U092124-40-3Dimethylamine (I)
U09360-11-7p-Dimethylaminoazobenzene
U09457-97-67,12-Dimethylbenz[a]anthracene
U095119-93-73,3"'-Dimethylbenzidine
U09680-15-9alpha,alpha-Dimethylbenzylhydroperoxide (R)
U09779-44-7Dimethylcarbamoyl chloride
U09857-14-71,1-Dimethylhydrazine
U099540-73-81,2-Dimethylhydrazine
U101105-67-92,4-Dimethylphenol
U102131-11-3Dimethyl phthalate
U10377-78-1Dimethyl sulfate
U105121-14-22,4-Dinitrotoluene
U106606-20-22,6-Dinitrotoluene
U107117-84-0Di-n-octyl phthalate
U108123-91-11,4-Dioxane
U109122-66-71,2-Diphenylhydrazine
U110142-84-7Dipropylamine (I)
U111621-64-7Di-n-propylnitrosamine
U041106-89-8Epichlorohydrin
U00175-07-0Ethanal (I)
U17455-18-5Ethanamine, N-ethyl-N-nitroso-
U404121-44-8Ethanamine, N,N-diethyl-
U39430558-43-1Ethanimidothioic acid, 2-(dimethylamino)-N-hydroxy-2-oxo-,methyl ester
U41059669-26-0Ethanimidothioic acid, N,N'-[thiobis[(methylimino)carbonyloxy]]bis-,dimethyl ester
U15591-80-51,2-Ethanediamine, N,N-dimethyl-N"' -2-pyridinyl- N"'- (2-thienylmethyl) -
U067106-93-4Ethane, 1,2-dibromo-
U07675-34-3Ethane, 1,1-dichloro-
U077107-06-2Ethane, 1,2-dichloro-
U13167-72-1Ethane, hexachloro-
U024111-91-1Ethane, 1,1"' - [methylenebis(oxy)]bis[2-chloro-
U11760-29-7Ethane, 1,1"'-oxybis-(I)
U025111-44-4Ethane, 1,1"'-oxybis[2-chloro-
U18476-01-7Ethane, pentachloro-
U208630-20-6Ethane, 1,1,1,2- tetrachloro-
U20979-34-5Ethane, 1,1,2,2- tetrachloro-
U21862-55-5Ethanethioamide
U22671-55-6Ethane, 1,1,1-trichloro-
U22779-00-5Ethane, 1,1,2-trichloro-
U359110-80-5Ethanol, 2-ethoxy-
U1731116-54-7Ethanol, 2,2"'- (nitrosoimino)bis-
U3955952-26-1Ethanol, 2,2'-oxybis-, dicarbamate
U00498-86-2Ethanone, 1-phenyl-
U04375-01-4Ethene, chloro-
U042110-75-8Ethene, (2-chloroethoxy)-
U07875-35-4Ethene, 1,1-dichloro-
U079156-60-5Ethene, 1,2-dichloro-, (E)-
U210127-18-4Ethene, tetrachloro-
U22879-01-6Ethene, trichloro-
U112141-78-6Ethyl acetate (I)
U113140-88-5Ethyl acrylate (I)
U23851-79-6Ethyl carbamate (urethane)
U11760-29-7Ethyl ether (I)
U1141111-54-6Ethylenebisdithiocarbamic acid, salts & esters
U067106-93-4Ethylene dibromide
U077107-06-2Ethylene dichloride
U359110-80-5Ethylene glycol monoethyl ether
U11575-21-8Ethylene oxide (I,T)
U11696-45-7Ethylenethiourea
U07675-34-3Ethylidene dichloride
U11897-63-2Ethyl methacrylate
U11962-50-0Ethyl methanesulfonate
U120206-44-0Fluoranthene
U12250-00-0Formaldehyde
U12364-18-6Formic acid (C,T)
U124110-00-9Furan (I)
U12598-01-12-Furancarboxaldehyde (I)
U147108-31-62,5-Furandione
U213109-99-9Furan, tetrahydro-(I)
U12598-01-1Furfural (I)
U124110-00-9Furfuran (I)
U20618883-66-4Glucopyranose, 2-deoxy-2- (3-methyl-3- nitrosoureido) -, D-
U20618883-66-4D-Glucose, 2-deoxy-2-[[(methylnitrosoamino)- carbonyl]amino] -
U126765-34-4Glycidylaldehyde
U16370-25-7Guanidine, N-methyl- N"'-nitro-N-nitroso-
U127118-74-1Hexachlorobenzene
U12887-68-3Hexachlorobutadiene
U13077-47-4Hexachlorocyclopentadiene
U13167-72-1Hexachloroethane
U13270-30-4Hexachlorophene
U2431888-71-7Hexachloropropene
U133302-01-2Hydrazine (R,T)
U0861615-80-1Hydrazine, 1,2-diethyl-
U09857-14-7Hydrazine, 1,1-dimethyl-
U099540-73-8Hydrazine, 1,2-dimethyl-
U109122-66-7Hydrazine, 1,2-diphenyl-
U1347664-39-3Hydrofluoric acid (C,T)
U1347664-39-3Hydrogen fluoride (C,T)
U1357783-06-4Hydrogen sulfide
U1357783-06-4Hydrogen sulfide H2S
U09680-15-9Hydroperoxide, 1-methyl-1-phenylethyl- (R)
U11696-45-72-Imidazolidinethione
U137193-39-5Indeno [1,2, 3-cd] pyrene
U19085-44-91, 3-Isobenzofurandione
U14078-83-1Isobutyl alcohol (I,T)
U141120-58-1Isosafrole
U142143-50-0Kepone
U143303-34-4Lasiocarpine
U144301-04-2Lead acetate
U1461335-32-6Lead, bis(acetato-O)tetrahydroxytri-
U1457446-27-7Lead phosphate
U1461335-32-6Lead subacetate
U12958-89-9Lindane
U16370-25-7MNNG
U147108-31-6Maleic anhydride
U148123-33-1Maleic hydrazide
U149109-77-3Malononitrile
U150148-82-3Melphalan
U1517439-97-6Mercury
U152126-98-7Methacrylonitrile (I,T)
U092124-40-3Methanamine, N-methyl- (I)
U02974-83-9Methane, bromo-
U04574-87-3Methane, chloro- (I,T)
U046107-30-2Methane, chloromethoxy-
U06874-95-3Methane, dibromo-
U08075-09-2Methane, dichloro-
U07575-71-8Methane, dichlorodifluoro-
U13874-88-4Methane, iodo-
U11962-50-0Methanesulfonic acid, ethyl ester
U21156-23-5Methane, tetrachloro-
U15374-93-1Methanethiol (I,T)
U22575-25-2Methane, tribromo-
U04467-66-3Methane, trichloro-
U12175-69-4Methane, trichlorofluoro-
U03657-74-94, 7-Methano-lH-indene, 1,2,4,5,6,7,8,8-octachloro- 2,3,3a,4,7,7a-hexahydro-
U15467-56-1Methanol (I)
U15591-80-5Methapyrilene
U142143-50-01,3,4-Metheno-2H-cyclobuta[cd]pentalen-2-one, 1,1a,3,3a,4,5, 5,5a,5b,6-decachlorooctahydro-
U24772-43-5Methoxychlor
U15467-56-1Methyl alcohol (I)
U02974-83-9Methyl bromide
U186504-60-91-Methylbutadiene (I)
U04574-87-3Methyl chloride (I,T)
U15679-22-1Methyl chlorocarbonate (I,T)
U22671-55-6Methyl chloroform
U15756-49-53-Methylcholanthrene
U158101-14-44,4"'-Methylenebis (2-chloroaniline)
U06874-95-3Methylene bromide
U08075-09-2Methylene chloride
U15978-93-3Methyl ethyl ketone (MEK) (I,T)
U1601338-23-4Methyl ethyl ketone peroxide (R,T)
U13874-88-4Methyl iodide
U161108-10-1Methyl isobutyl ketone (I)
U16280-62-6Methyl methacrylate (I,T)
U161108-10-14-Methyl-2-pentanone (I)
U16456-04-2Methylthiouracil
U01050-07-7Mitomycin C
U05920830-81-35,12-Naphthacenedione, 8-acetyl-10- [(3-amino-2,3,6-trideoxy) -alpha-L-lyxo-hexopyranosyl)oxy]-7,8,9,10-tetrahydro-6,8, 11-trihydroxy-1-methoxy-, (8S-cis)-
U167134-32-71-Naphthalenamine
U16891-59-82-Naphthalenamine
U026494-03-1Naphthalenamine, N,N"'-bis(2-chloroethyl)-
U16591-20-3Naphthalene
U04791-58-7Naphthalene, 2-chloro-
U166130-15-41,4-Naphthalenedione
U23672-57-12,7-Naphthalenedisulfonic acid, 3,3"'-[(3,3"'-dimethyl[l,l"'-biphenyl]-4,4"'-diyl) bis(azo)bis [5-amino-4-hydroxy]-, tetrasodium salt
U27963-25-21-Naphthalenol, methylcarbamate
U166130-15-41,4-Naphthoquinone
U167134-32-7alpha-Naphthylamine
U16891-59-8beta-Naphthylamine
U21710102-45-1Nitric acid, thallium(1 +) salt
U16998-95-3Nitrobenzene (I,T)
U170100-02-7p-Nitrophenol
U17179-46-92-Nitropropane (I,T)
U172924-16-3N-Nitrosodi-n-butylamine
U173116-54-7N-Nitrosodiethanolamine
U17455-18-5N-Nitrosodiethylamine
U176759-73-9N-Nitroso-N-ethylurea
U177684-93-5N-Nitroso-N-methylurea
U178615-53-2N-Nitroso-N-methylurethane
U179100-75-4N-Nitrosopiperidine
U180930-55-2N-Nitrosopyrrolidine
U18199-55-85-Nitro-o-toluidine
U1931120-71-41,2-Oxathiolane, 2,2-dioxide
U05850-18-02H-1,3,2-Oxazaphosphorin- 2-amine, N,N-bis (2-chloroethyl) tetrahydro-, 2-oxide
U11575-21-8Oxirane (I,T)
U126765-34-4Oxiranecarboxyaldehyde
U041106-89-8Oxirane, (chloromethyl)-
U182123-63-7Paraldehyde
U183608-93-5Pentachlorobenzene
U18476-01-7Pentachloroethane
U18582-68-8Pentachloronitrobenzene (PCNB)
See F02787-86-5Pentachlorophenol
U161108-10-1Pentanol, 4-methyl- (I)
U186504-60-91,3-Pentadiene (I)
U18762-44-2Phenacetin
U188108-95-2Phenol
U04895-57-8Phenol, 2-chloro-
U03959-50-7Phenol, 4-chloro-3-methyl-
U081120-83-2Phenol, 2,4-dichloro-
U08287-65-0Phenol, 2,6-dichloro-
U08956-53-1Phenol, 4,4"'- (1,2-diethyl-1,2-ethenediyl)bis-, (E) -
U101105-67-9Phenol, 2,4-dimethyl-
U0521319-77-3Phenol, methyl-
U13270-30-4Phenol, 2,2"'-methylenebis [3,4,6-trichloro-
U411114-26-1Phenol, 2-(1-methylethoxy)-, methylcarbamate
U170100-02-7Phenol, 4-nitro-
See F02787-86-5Phenol, pentachloro-
See F02758-90-2Phenol, 2,3,4,6 -tetrachloro-
See F02795-95-4Phenol, 2,4,5-trichloro-
See F02788-06-2Phenol, 2,4,6-trichloro-
U150148-82-3L-Phenylalanine, 4-[bis(2-chloroethyl) amino]-
U1457446-27-7Phosphoric acid, lead(2+) salt (2:3)
U0873288-58-2Phosphorodithioic acid, O,O-diethyl S-methylester
U1891314-80-3Phosphorus sulfide (R)
U19085-44-9Phthalic anhydride
U191109-06-82-Picoline
U179100-75-4Piperidine, 1-nitroso-
U19223950-58-5Pronamide
U194107-10-81-Propanamine (I,T)
U111621-64-71-Propanamine, N-nitroso-N-propyl-
U110142-84-71-Propanamine, N-propyl- (I)
U06696-12-8Propane, 1,2-dibromo- 3-chloro-
U08378-87-5Propane, 1,2-dichloro-
U149109-77-3Propanedinitrile
U17179-46-9Propane, 2-nitro- (I,T)
U027108-60-1Propane, 2,2"'-oxybis[2-chloro-
U1931120-71-41,3-Propane sultone
See F02793-72-1Propanoic acid, 2- (2,4,5-trichlorophenoxy)-
U235126-72-71-Propanol, 2,3-dibromo-, phosphate (3:1)
U14078-83-11-Propanol, 2-methyl- (I,T)
U00267-64-12-Propanone (I)
U00779-06-12-Propenamide
U084542-75-61-Propene, 1,3-dichloro-
U2431888-71-71-Propene, 1,1,2,3,3,3 -hexachloro-
U009107-13-12-Propenenitrile
U152126-98-72-Propenenitrile, 2-methyl- (I,T)
U00879-10-72-Propenoic acid (I)
U113140-88-52-Propenoic acid, ethyl ester (I)
U11897-63-22-Propenoic acid, 2-methyl-, ethyl ester
U16280-62-62-Propenoic acid, 2-methyl-, methyl ester (I,T)
U373122-42-9Propham
U411114-26-1Propoxur
U194107-10-8n-Propylamine (I,T)
U08378-87-5Propylene dichloride
U38752888-80-9Prosulfocarb
U148123-33-13,6-Pyridazinedione, 1,2-dihydro-
U196110-86-1Pyridine
U191109-06-8Pyridine, 2-methyl-
U23766-75-12,4-(1H, 3H)-Pyrimidinedione, 5-[bis(2-chloroethyl)amino]-
U16456-04-24(1H)-Pyrimidinone, 2,3-dihydro-6-methyl-2-thioxo-
U180930-55-2Pyrrolidine, 1-nitroso-
U20050-55-5Reserpine
U201108-46-3Resorcinol
U20394-59-7Safrole
U2047783-00-8Selenious acid
U2047783-00-8Selenium dioxide
U2057488-56-4Selenium sulfide
U2057488-56-4Selenium sulfide SeS2 (R,T)
U015115-02-6L-Serine, diazoacetate (ester)
See F02793-72-1Silvex (2,4,5-TP)
U20618883-66-4Streptozotocin
U10377-78-1Sulfuric acid, dimethyl ester
U1891314-80-3Sulfur phosphide (R)
See F02793-76-52,4,5-T
U20795-94-31,2,4,5- Tetrachlorobenzene
U208630-20-61,1,1,2- Tetrachloroethane
U20979-34-51,1,2,2- Tetrachloroethane
U210127-18-4Tetrachloroethylene
See F02758-90-22,3,4,6- Tetrachlorophenol
U213109-99-9Tetrahydrofuran (I)
U214563-68-8Thallium(I) acetate
U2156533-73-9Thallium (I) carbonate
U2167791-12-0Thallium(I) chloride
U2167791-12-0Thallium chloride TlCl
U21710102-45-1Thallium (I) nitrate
U21862-55-5Thioacetamide
U41059669-26-0Thiodicarb
U15374-93-1Thiomethanol (I,T)
U244137-26-8Thioperoxydicarbonic diamide [(H2N)C(S)]2S2, tetramethyl-
U40923564-05-8Thiophanate-methyl
U21962-56-6Thiourea
U244137-26-8Thiram
U220108-88-3Toluene
U22125376-45-8Toluenediamine
U22326471-62-5Toluene diisocyanate (R,T)
U32895-53-4o-Toluidine
U353106-49-0p-Toluidine
U222636-21-5o-Toluidine hydrochloride
U3892303-17-5Triallate
U01161-82-51H-1,2,4-Triazol-3-amine
U22671-55-61,1,1-Trichloroethane
U22779-00-51,1,2-Trichloroethane
U22879-01-6Trlchloroethylene
U12175-69-4Trichloromonofluoromethane
See F02795-95-42,4,5-Trichlorophenol
See F02788-06-22,4,6-Trichlorophenol
U404121-44-8Triethylamine
U23499-35-41,3,5-Trinitrobenzene (R,T)
U182123-63-71,3,5-Trioxane, 2,4,6-trimethyl-
U235126-72-7Tris(2,3-dibromopropyl) phosphate
U23672-57-1Trypan blue
U23766-75-1Uracil mustard
U176759-73-9Urea, N-ethyl-N-nitroso-
U177684-93-5Urea, N-methyl-N-nitroso-
U04375-01-4Vinyl chloride
U248181-81-2Warfarin, & salts, when present at concentrations of 0.3 percent or less
U2391330-20-7Xylene (I)
U20050-55-5Yohimban-16- carboxylic acid, 11,17-dimethoxy-18-[(3,4, 5-trimethoxybenzoyl)oxy]-, methyl ester, (3beta, 16beta, 17alpha, 18beta, 20alpha)-
U2491314-84-7Zinc phosphide Zn3P2, when present at concentrations of 10 percent or less

____ 1CAS number given for parent compound only.

(e)Wastes containing polychlorinated biphenyls (PCBs).
(1) All solid wastes containing 50 parts per million (ppm) by weight (on a dry weight basis for other than liquid wastes) or greater of polychlorinated biphenyls (PCBs) are listed hazardous wastes, excluding small capacitors as defined in paragraph (3) of this subdivision and PCB articles drained in accordance with subparagraphs (2)(ii) and (iii) of this subdivision. PCB articles that contain less than 50 ppm PCBs are not regulated as hazardous waste. Oils in or from electrical equipment whose PCB concentration is unknown, except circuit breakers, reclosers and cable, must be assumed to contain between 50 and 500 ppm PCB and are listed hazardous waste. PCB and PCBs mean any chemical substance that is limited to the biphenyl molecule that has been chlorinated to varying degrees. Any chemical waste, combination of waste, or environmental media that contains less than 50 ppm PCBs are listed hazardous waste only as specifically provided in paragraph (2) of this subdivision. Wastes that may contain PCBs include dielectric fluids, contaminated solvents, waste oil, heat transfer fluids, hydraulic fluids, dredge spoils, and material contaminated as a result of spills. The hazardous code for these PCB wastes shall be toxic waste (T). Environmental media means naturally occurring, non-living substances, including soil, sediment, rock, groundwater, surface water, surface runoff, air, and only such animal and vegetable matters as may be incidentally contained therein (e.g., soil and water bacteria, underground roots, skeletal remains, etc.). These wastes shall have hazardous waste numbers assigned as follows:

DECWaste
hazardous
waste number
B001PCB oil (concentrated) from transformers, capacitors, etc.
B002Petroleum oil or other liquid containing 50 ppm or greater of PCBs, but less than 500 ppm PCBs. This includes oil from electrical equipment whose PCB concentration is unknown, except for circuit breakers, reclosers, rectifiers and cable.
B003Petroleum oil or other liquid containing 500 ppm or greater of PCBs.
B004PCB articles containing 50 ppm or greater of PCBs, but less than 500 ppm PCBs, excluding small capacitors. This includes oil-filled electrical equipment whose PCB concentration is unknown, except for circuit breakers, reclosers, rectifiers and cable.
B005PCB articles, other than transformers, that contain 500 ppm or greater of PCBs, excluding small capacitors.
B006PCB transformers. PCB transformers means any transformer that contains 500 ppm PCB or greater.
B007Other PCB wastes, including contaminated soil, solids, sludges, clothing, rags and dredge material.
Note: PCBs are also regulated by 40 CFR part 761 . A person must comply with both this Part and 40 CFR part 761 (see section 370.1[e] ot this Title).

(2) Drained PCB articles.
(i) Except as provided in subparagraphs (ii) and (iii) of this paragraph, drained PCB articles containing at least 50 ppm PCBs are regulated as hazardous waste.
(ii) PCB articles, except capacitors, that contain between 50 and 500 ppm PCB, are no longer regulated as PCB listed hazardous waste provided that all free-flowing liquid has been drained from the article. The drained liquid is a listed hazardous waste, as is any solvent used for flushing.
(iii)
(a) Hydraulic machines containing less than 1,000 ppm PCB are no longer regulated as PCB listed hazardous waste, provided that all free-flowing liquid has been drained from the hydraulic machine. The drained liquid is a liquid hazardous waste, as is any solvent used for flushing.
(b) Hydraulic machines containing 1,000 ppm PCB are no longer regulated as PCB listed hazardous waste, provided that all free-flowing liquid has been drained from the hydraulic machine, and the drained hydraulic machine is flushed with a solvent in which PCBs are readily soluble. The solvent to be used for flushing must contain less than 50 ppm PCB. The drained liquid and the solvent used for flushing are listed hazardous wastes.
(3) Definitions.
(i)PCB article means any manufactured article, other than a PCB container, that contains PCBs and whose surface(s) has been in direct contact with PCBs. PCB article includes capacitors, transformers, electric motors, circuit breakers, reclosers, rectifiers, voltage regulators, switches (including sectionalizers and motor starters), electromagnets, cable, hydraulic machines, pumps, pipes, and any other manufactured item which is formed to a specific shape or design during manufacture, has end use function(s) dependent in whole or in part upon its shape or design during end use, and has either no change of chemical composition during its end use or only those changes of composition which have no commercial purpose separate from that of the PCB article.
(ii)Small capacitor means a capacitor which contains less than 1.36 kg (3 lb.) of dielectric fluid. The following assumptions may be used if the actual weight of the dielectric fluid is unknown. A capacitor whose total volume is less than 1,639 cubic centimeters (100 cubic inches) may be considered to contain less than 1.36 kg (3 lb.) of dielectric fluid and a capacitor whose total volume is more than 3,278 cubic centimeters (200 cubic inches) must be considered to contain more than 1.36 kg (3 lb.) of dielectric fluid. A capacitor whose volume is between 1,639 and 3,278 cubic centimeters may be considered to contain less than 1.36 (3 lb.) of dielectric fluid if the total weight of the capacitor is less than 4.08 kg (9 lb.).
(4) Testing procedures. The procedures in 40 CFR 761.60(g) (see section 370.1[e] of this Title) will be used to determine the concentration of PCBs, unless a petition for equivalent testing or analytical methods is submitted and approved per section 370.3 of this Title.
(f)Deletion of certain hazardous waste codes following equipment cleaning and replacement.
(1) Wastes from wood preserving processes at plants that do not resume or initiate use of chlorophenolic preservatives will not meet the listing definition of F032 once the generator has met all of the requirements of paragraphs (2) and (3) of this subdivision. These wastes may, however, continue to meet another hazardous waste listing description or may exhibit one or more of the hazardous waste characteristics.
(2) Generators must either clean or replace all process equipment that may have come into contact with chlorophenolic formulations or constituents thereof, including, but not limited to, treatment cylinders, sumps, tanks, piping systems, drip pads, fork lifts, and trams, in a manner that minimizes or eliminates the escape of hazardous waste or constituents, leachate, contaminated drippage, or hazardous waste decomposition products to the ground water, surface water, or atmosphere.
(i) Generators shall do one of the following:
(a) prepare and follow an equipment replacement plan and clean equipment in accordance with this subdivision;
(b) prepare and follow an equipment replacement plan and replace equipment in accordance with this subdivision; or
(c) document cleaning and replacement in accordance with this subdivision, carried out after termination of use of chlorophenolic preservations.
(ii) Cleaning requirements.
(a) Prepare and sign a written equipment cleaning plan that describes:
(1) the equipment to be cleaned;
(2) how the equipment will be cleaned;
(3) the solvent to be used in cleaning;
(4) how solvent rinses will be tested; and
(5) how cleaning residues will be disposed.
(b) Equipment must be cleaned as follows:
(1) remove all visible residues from process equipment; and
(2) rinse process equipment with an appropriate solvent until dioxins and dibenzofurans are not detected in the final solvent rinse.
(c) Analytical requirements.
(1) rinses must be tested by using an appropriate method;
(2) not detected"TM means at or below the following lower method calibration limits (MCLs): The 2,3,7,8-TCDD-based MCLB0.01 parts per trillion (ppt), sample weight of 1000 g, IS spiking level of 1 ppt, final extraction volume of 10-50 [PHI]L (microlitre). For other congenersBmultiply the values by 1 for TCDF/PeCDD/PeCDF, by 2.5 for HxCDD/HxCDF/HpCDD/HpCDF, and by 5 for OCDD/OCDF.
(d) The generator must manage all residues from the cleaning process as F032 waste.
(iii) Replacement requirements.
(a) Prepare and sign a written equipment replacement plan that describes:
(1) the equipment to be replaced;
(2) how the equipment will be replaced; and
(3) how the equipment will be disposed.
(b) The generator must manage the discarded equipment as F032 waste.
(iv) Documentation requirements.
(a) Document that previous equipment cleaning and/or replacement was performed in accordance with this subdivision and occurred after cessation of use of chlorophenolic preservatives.
(3) The generator must maintain the following records documenting the cleaning and replacement as part of the facility's operating record:
(i) the name and address of the facility;
(ii) formulations previously used and the date on which their use ceased in each process at the plant;
(iii) formulations currently used in each process at the plant;
(iv) the equipment cleaning or replacement plan;
(v) the name and address of any persons who conducted the cleaning and replacement;
(vi) the dates on which cleaning and replacement were accomplished;
(vii) the dates of sampling and testing;
(viii) a description of the sample handling and preparation techniques, including techniques used for extraction, containerization, preservation, and chain-of-custody of the samples;
(ix) a description of the tests performed, the date the tests were performed, and the results of the tests;
(x) the name and model numbers of the instrument(s) used in performing the tests;
(xi) QA/QC documentation; and
(xii) the following statement signed by the generator or an authorized representative:

"I certify under penalty of law that all process equipment required to be cleaned or replaced under subdivision (f) of this section was cleaned or replaced as represented in the equipment cleaning and replacement plan and accompanying documentation. I am aware that there are significant penalties for providing false information, including the possibility of fine or imprisonment."

N.Y. Comp. Codes R. & Regs. Tit. 6 § 371.4

Amended New York State Register March 4, 2020/Volume XLII, Issue 09, eff. 4/18/2020