N.Y. Comp. Codes R. & Regs. tit. 16 § 257.7

Current through Register Vol. 46, No. 43, October 23, 2024

Section 257.7 - Corrosion control

(a) Each operator shall establish procedures as required by section 257.9(g)(5) of this Part to implement the requirements of this section. These procedures, including those for the design, installation, operation and maintenance of cathodic protection systems, must be carried out by, or under the direction of, a person qualified by experience and training in pipeline corrosion control methods.

(b) Each cathodic protection system must provide a level of cathodic protection that complies with one or more of the applicable criteria contained in Appendix 14-D of this Title. If none of these criteria are applicable, the cathodic protection system must provide a level of cathodic protection at least equal to that provided by compliance with one or more of these criteria.

N.Y. Comp. Codes R. & Regs. Tit. 16 § 257.7