N.Y. Comp. Codes R. & Regs. Tit. 12 §§ 14-9.41

Current through Register Vol. 46, No. 51, December 18, 2024

Section 14-9.41 - Identification of plates

(a) When the boiler is completed, there shall remain visible on shell plates, furnace sheets, and heads, one group of the plate manufacturer's stamps consisting of the manufacturer's name, manufacturer's test identification number, class, and tensile strength; except that heads containing tube holes and buttstraps shall have visible at least a sufficient portion of such stamps for identification.

(b) It is permissible for an authorized representative of the boiler manufacturer to transfer the markings on the plate provided a record is made of such transfer. The procedure for making such transfer shall be acceptable to the authorized inspector.

(c) An authorized representative of the plate manufacturer may duplicate the required stamping on any material wherever located.

N.Y. Comp. Codes R. & Regs. Tit. 12 §§ 14-9.41